From: Jonathan V Hays (jhays@jtan.com)
Date: Sat Jul 05 2003 - 11:59:08 GMT-3
http://www.cisco.com/warp/public/793/access_dial/auxback.html
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of Richard L. Pickard
> Sent: Saturday, July 05, 2003 11:18 AM
> To: Ken Li; ccielab@groupstudy.com
> Subject: RE: Attempting to connect AUX ports back to back
>
>
> When you say "connect AUX ports back to back"
> do you mean no modems, no telco ? truly back to back ?
>
> What type of cable are you using ? What is gonna simulate the telco
> signaling ?
>
> Richard
>
> //
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Ken Li
> Sent: Saturday, July 05, 2003 4:25 AM
> To: ccielab@groupstudy.com
> Subject: Attempting to connect AUX ports back to back
>
>
> I can't seem to get this working. One router is a 2520, the other, a
> 2511. What I found strange is that on the 2520 I could only configure
> async 4, but on the 2511 it would allow me go configure async
> 1 through
> 17. Of course there's only one physical async port. This is
> what I get
> non stop basically:
>
> 05:54:20: %LINK-5-CHANGED: Interface Async1, changed state to reset
> 05:54:20: %DIALER-6-UNBIND: Interface As1 unbound from profile Di0
> 05:54:25: %LINK-3-UPDOWN: Interface Async1, changed state to up
> 05:54:25: %DIALER-6-BIND: Interface As1 bound to profile Di0
> 05:54:49: %LINK-5-CHANGED: Interface Async1, changed state to reset
> 05:54:49: %DIALER-6-UNBIND: Interface As1 unbound from profile Di0
> 05:54:54: %LINK-3-UPDOWN: Interface Async1, changed state to up
> 05:54:54: %DIALER-6-BIND: Interface As1 bound to profile Di0
>
> Here are my configs: the 2511 being R1 and 2520 being R7.
> I've left out
> non related stuff. I'm pretty stumped at this point and it just might
> be something really stuipd, but any help is appreciated, thanks. BTW
> I'm using a rollover cable.
> **************************************************************
> **********
> ******
> hostname r1
> !
> !
> username r7 password 0 cisco
> ip subnet-zero
> no ip domain-lookup
> !
> !
> !
> !
> interface Async1
> no ip address
> encapsulation ppp
> dialer in-band
> dialer pool-member 1
> async dynamic routing
> async mode dedicated
> no peer default ip address
> ppp authentication chap
> !
> interface Dialer0
> ip address 137.20.8.1 255.255.255.0
> encapsulation ppp
> dialer pool 1
> dialer remote-name r7
> dialer string 1234
> dialer-group 1
> ppp authentication chap
> !
> line aux 0
> modem Dialin
> transport input all
> speed 38400
> !
> end
> **************************************************************
> **********
> *************
> Current configuration : 2204 bytes
> !
> version 12.2
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname r7
> !
> !
> username r1 password 0 cisco
> ip subnet-zero
> no ip domain-lookup
> !
> chat-script myscript "" ""
> !
> !
> !
> !
> interface Async4
> no ip address
> encapsulation ppp
> no ip route-cache
> no ip mroute-cache
> dialer in-band
> dialer pool-member 1
> async default routing
> async dynamic routing
> async mode dedicated
> no peer default ip address
> ppp authentication chap
> !
> interface Dialer0
> ip address 137.20.8.7 255.255.255.0
> encapsulation ppp
> dialer pool 1
> dialer remote-name r1
> dialer string 1234
> dialer-group 1
> ppp authentication chap
> !
> dialer-list 1 protocol ip permit
> !
> line aux 0
> exec-timeout 0 0
> script dialer myscript
> modem Host
> transport input all
> speed 38400
> flowcontrol hardware
>
>
> ______________________________________________________________
> _________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> ______________________________________________________________
> _________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:24 GMT-3