From: Ken Li (kenli@kenli.cc)
Date: Sat Jul 05 2003 - 07:24:46 GMT-3
I can't seem to get this working. One router is a 2520, the other, a
2511. What I found strange is that on the 2520 I could only configure
async 4, but on the 2511 it would allow me go configure async 1 through
17. Of course there's only one physical async port. This is what I get
non stop basically:
05:54:20: %LINK-5-CHANGED: Interface Async1, changed state to reset
05:54:20: %DIALER-6-UNBIND: Interface As1 unbound from profile Di0
05:54:25: %LINK-3-UPDOWN: Interface Async1, changed state to up
05:54:25: %DIALER-6-BIND: Interface As1 bound to profile Di0
05:54:49: %LINK-5-CHANGED: Interface Async1, changed state to reset
05:54:49: %DIALER-6-UNBIND: Interface As1 unbound from profile Di0
05:54:54: %LINK-3-UPDOWN: Interface Async1, changed state to up
05:54:54: %DIALER-6-BIND: Interface As1 bound to profile Di0
Here are my configs: the 2511 being R1 and 2520 being R7. I've left out
non related stuff. I'm pretty stumped at this point and it just might
be something really stuipd, but any help is appreciated, thanks. BTW
I'm using a rollover cable.
************************************************************************
******
hostname r1
!
!
username r7 password 0 cisco
ip subnet-zero
no ip domain-lookup
!
!
!
!
interface Async1
no ip address
encapsulation ppp
dialer in-band
dialer pool-member 1
async dynamic routing
async mode dedicated
no peer default ip address
ppp authentication chap
!
interface Dialer0
ip address 137.20.8.1 255.255.255.0
encapsulation ppp
dialer pool 1
dialer remote-name r7
dialer string 1234
dialer-group 1
ppp authentication chap
!
line aux 0
modem Dialin
transport input all
speed 38400
!
end
************************************************************************
*************
Current configuration : 2204 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r7
!
!
username r1 password 0 cisco
ip subnet-zero
no ip domain-lookup
!
chat-script myscript "" ""
!
!
!
!
interface Async4
no ip address
encapsulation ppp
no ip route-cache
no ip mroute-cache
dialer in-band
dialer pool-member 1
async default routing
async dynamic routing
async mode dedicated
no peer default ip address
ppp authentication chap
!
interface Dialer0
ip address 137.20.8.7 255.255.255.0
encapsulation ppp
dialer pool 1
dialer remote-name r1
dialer string 1234
dialer-group 1
ppp authentication chap
!
dialer-list 1 protocol ip permit
!
line aux 0
exec-timeout 0 0
script dialer myscript
modem Host
transport input all
speed 38400
flowcontrol hardware
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:24 GMT-3