From: Ram Shummoogum (rshummoo@ca.ibm.com)
Date: Sat Jul 05 2003 - 07:56:36 GMT-3
This happen to me a couple of weeks ago. Everything was well configured
with no password.
I saved/reloaded and it came back. Weird...
"Emad " <emad@zakq8.com>@groupstudy.com on 07/05/2003 04:23:54 AM
Please respond to "Emad " <emad@zakq8.com>
Sent by: nobody@groupstudy.com
To: "'sohu'" <xieji@sohu.com>
cc: <ccielab@groupstudy.com>
Subject: RE: CAT3550 : VTP problem
Hi,
sh vtp sta
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 7
VTP Operating Mode : Client
VTP Domain Name : emad
VTP Pruning Mode : Disabled
VTP V2 Mode : Enabled
VTP Traps Generation : Disabled
MD5 digest : 0xC0 0x33 0x0C 0xA2 0x35 0xD1 0xA8
0xA9
Configuration last modified by 1.1.1.1 at 3-1-93 00:48:08
Top#sh in f0/1 swi
Top#sh in f0/1 switchport
Name: Fa0/1
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: On
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 1 (default)
Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
Capture VLANs Allowed: ALL
Protected: false
Unknown unicast blocked: disabled
Unknown multicast blocked: disabled
--More-- Voice VLAN: none (Inactive)
Appliance trust: none
Top#down
Trying down (1.1.1.2)... Open
User Access Verification
Password:
Down-Back#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Down-Back(config)#
Down-Back#
01:15:07: %SYS-5-CONFIG_I: Configured from console by vty1 (1.1.1.1)
Down-Back#sh vtp sta
VTP Version : 2
Configuration Revision : 2
Maximum VLANs supported locally : 1005
Number of existing VLANs : 12
VTP Operating Mode : Server
VTP Domain Name : emad
VTP Pruning Mode : Disabled
VTP V2 Mode : Enabled
VTP Traps Generation : Disabled
MD5 digest : 0xFB 0x14 0xFC 0xA8 0xF7 0xFE 0x8C
0x4A
Configuration last modified by 1.1.1.2 at 3-1-93 00:38:32
Local updater ID is 1.1.1.2 on interface Vl1 (lowest numbered VLAN
interface found)
Down-Back#sh in f0/1 swit
Name: Fa0/1
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: On
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 1 (default)
Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
Capture VLANs Allowed: ALL
Protected: false
Unknown unicast blocked: disabled
Unknown multicast blocked: disabled
--More-- Voice VLAN: none (Inactive)
--More-- Appliance trust: none
Down-Back#
-----Original Message-----
From: sohu [mailto:xieji@sohu.com]
Sent: Saturday, July 05, 2003 11:09 AM
To: Emad
Subject: Re: CAT3550 : VTP problem
Hello
You would better paste show vtp status and sh int f0/1 switchport on
both two switches.The information provided is so limited I can not tell
what happened.
----- Original Message -----
From: "Emad " <emad@zakq8.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, July 05, 2003 3:59 PM
Subject: CAT3550 : VTP problem
> Folks,
> In hurry , something simple happened to my two cat3550 switches with
the
> below configurations , and the client is not receiving any updates
from
> the server?!!! I did it before but I don't know what is the wrong in
> this straight-forward configurations
>
> !
> ip routing
>
> interface FastEthernet0/1
> switchport trunk encapsulation dot1q
> --More-- switchport mode trunk
> no ip address
> !
> interface FastEthernet0/2
> switchport access vlan 10
> switchport mode access
> no ip address
>
> interface Vlan1
> ip address 1.1.1.2 255.255.255.0
> !
> ip classless
> ip http server
> !
> !
> Down-Back#
>
> And the 2nd one conf:
>
> !
> !
> interface FastEthernet0/1
> switchport trunk encapsulation dot1q
> --More-- switchport mode trunk
> no ip address
> !
> !
> interface Vlan1
> ip address 1.1.1.1 255.255.255.0
> !
> ip classless
> ip http server
> !
> !
> !
> Top#
>
> It may be simple but it is already here
>
> Thanx in advance
>
>
>
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:24 GMT-3