From: Kae Hsu (kae@du.net.tw)
Date: Fri Jul 04 2003 - 04:09:23 GMT-3
Dear Danny:
Try
(config-if)#default switch trunk pruning vlan
It seems worked
Regards
kae
----- Original Message -----
From: <Danny.Andaluz@triaton-na.com>
To: <ccielab@groupstudy.com>
Sent: Friday, July 04, 2003 4:02 AM
Subject: 3550 config help needed.
> Hello, Group,
>
> interface FastEthernet0/17
> switchport trunk encapsulation dot1q
> switchport trunk allowed vlan 1,56,70,100,1002-1005
> switchport trunk pruning vlan 2-1001,1006-4094
> switchport mode trunk
> no ip address
> end
>
> I have the above configured on this switch interface. I can't get rid of
the "switchport trunk pruning" line. Not sure why. I type no in front of
it and continues to be in the config. I tried removing all references to
"trunk" on the interface and it remains.
>
> Thanks,
> Danny
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:23 GMT-3