Re: 3550 config help needed.

From: Donny MATEO (donny.mateo@sg.ca-indosuez.com)
Date: Thu Jul 03 2003 - 23:02:57 GMT-3

Next message: John Underhill: "Re: pure eBGP set up will not pass routes"
Previous message: wing_lam@jossynergy.com: "Dlsw concepts"
Maybe in reply to: Danny.Andaluz@triaton-na.com: "3550 config help needed."
Next in thread: Kae Hsu: "Re: 3550 config help needed."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

How about removing all trunk configuration, and configure it as an access before converting it back to trunk ?

Donny

                      Danny.Andaluz@tri
                      aton-na.com To: ccielab@groupstudy.com
                      Sent by: cc:
                      nobody@groupstudy Subject: 3550 config help needed.
                      .com


                      07/04/2003 04:02
                      AM
                      Please respond to
                      Danny.Andaluz

Hello, Group,

interface FastEthernet0/17
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,56,70,100,1002-1005
switchport trunk pruning vlan 2-1001,1006-4094
switchport mode trunk
no ip address
end

I have the above configured on this switch interface. I can't get rid of the "switchport trunk pruning" line. Not sure why. I type no in front of it and continues to be in the config. I tried removing all references to "trunk" on the interface and it
remains.

Thanks,
Danny

Next message: John Underhill: "Re: pure eBGP set up will not pass routes"
Previous message: wing_lam@jossynergy.com: "Dlsw concepts"
Maybe in reply to: Danny.Andaluz@triaton-na.com: "3550 config help needed."
Next in thread: Kae Hsu: "Re: 3550 config help needed."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:22 GMT-3