From: John Matijevic (matijevi@bellsouth.net)
Date: Fri Jun 20 2003 - 00:04:30 GMT-3
Thanks Jin,
You pointed me to the right direction. I changed my frame so that I had full
mesh, instead of using r1 as a hub network, now its working fine as should.
thanks again.
Everything is working great now!
Sincerely,
Matijevic
----- Original Message -----
From: "Jung, Jin" <jin.jung@lmco.com>
To: "'John Matijevic'" <matijevi@bellsouth.net>; "'David Cho'"
<David.Cho@interealty.com>; <ccielab@groupstudy.com>
Sent: Thursday, June 19, 2003 10:55 PM
Subject: RE: bgp confederation peer,
> Hi John,,
>
> After looking at your full config,,
>
> You need ebgp-multihop command between r2 and r3,,
>
> Since r1 is the hub router,
>
> R2 and r3 are not directly connected, it has to go thru r1, 2 hops.
>
> I did not test this, but give it a try.
>
> Jin jung...
>
>
> -----Original Message-----
> From: John Matijevic [mailto:matijevi@bellsouth.net]
> Sent: Thursday, June 19, 2003 10:10 PM
> To: David Cho; ccielab@groupstudy.com
> Subject: Re: bgp confederation peer,
>
>
> OK Here are full configs, I am still having trouble with R3 peering with
R2
> in a confederation. Thanks again, Matijevic r1#c Building configuration...
>
> Current configuration : 2158 bytes
> !
> version 12.1
> no service single-slot-reload-enable
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> service compress-config
> service udp-small-servers
> service tcp-small-servers
> !
> hostname r1
> !
> logging rate-limit console 10 except errors
> !
> username r4 password 7 13061E010803
> clock summer-time est recurring
> ip subnet-zero
> no ip finger
> ip tcp synwait-time 5
> no ip domain-lookup
> !
> frame-relay de-list 1 protocol ip list 25
> isdn switch-type basic-ni
> cns event-service server
> !
> !
> !
> !
> !
> interface Loopback0
> ip address 1.1.1.1 255.255.255.0
> no ip route-cache
> no ip mroute-cache
> !
> interface Ethernet0
> ip address 186.1.1.1 255.255.255.0
> no ip route-cache
> no ip mroute-cache
> !
> interface Serial0
> ip address 153.1.200.1 255.255.255.0
> encapsulation frame-relay
> no ip route-cache
> no ip mroute-cache
> no fair-queue
> frame-relay map ip 153.1.200.2 102 broadcast
> frame-relay map ip 153.1.200.3 103 broadcast
> frame-relay map ip 153.1.200.4 104 broadcast
> no frame-relay inverse-arp
> !
> interface Serial1
> ip address 153.1.61.1 255.255.255.0
> no ip route-cache
> no ip mroute-cache
> !
> interface BRI0
> ip address 153.1.111.133 255.255.255.252
> encapsulation ppp
> no ip route-cache
> no ip mroute-cache
> shutdown
> dialer map ip 153.1.111.134 name r4 broadcast 4930624 dialer-group 1
isdn
> switch-type basic-ni ! router bgp 1000 bgp log-neighbor-changes bgp
> confederation identifier 1 bgp confederation peers 1001 network 1.1.1.0
> mask 255.255.255.0 neighbor 153.1.200.2 remote-as 10 neighbor
153.1.200.2
> send-community neighbor 153.1.200.4 remote-as 1001 neighbor 153.1.200.4
> next-hop-self neighbor 153.1.200.4 send-community ! ip kerberos
> source-interface any ip classless no ip http server ip as-path access-list
1
> permit ^100_[0-9]*$ ! dialer-list 1 protocol ip permit ! alias exec i show
> ip route alias exec c show running-config alias exec b show ip int brief
> alias exec o show ip ospf alias exec t config t alias exec srb show run |
> begin ! line con 0 password 7 070C285F4D06 logging synchronous login
> transport input none line aux 0 transport input all line vty 0 4
password
> 7 13061E010803 login ! end
>
> r1#
> comm-server#2
> [Resuming connection 2 to r2 ... ]
>
> r2#c
> Building configuration...
>
> Current configuration : 1742 bytes
> !
> version 12.1
> no service single-slot-reload-enable
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname r2
> !
> !
> username jill password 0 cisco
> username r6 password 0 cisco
> !
> !
> !
> !
> ip subnet-zero
> no ip domain-lookup
> !
> ip audit notify log
> ip audit po max-events 100
> cns event-service server
> !
> !
> !
> !
> voice-port 1/0/0
> !
> voice-port 1/0/1
> !
> !
> !
> !
> interface Loopback0
> ip address 2.2.2.2 255.255.255.0
> ip ospf network point-to-point
> !
> interface FastEthernet0/0
> ip address 10.1.0.1 255.255.255.0
> duplex auto
> speed auto
> !
> interface Serial0/0
> ip address 153.1.200.2 255.255.255.0
> encapsulation frame-relay
> no fair-queue
> frame-relay map ip 153.1.200.1 201 broadcast
> frame-relay map ip 153.1.200.3 201 broadcast
> frame-relay map ip 153.1.200.4 201 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type cisco
> !
> interface Serial0/1
> ip address 153.1.25.18 255.255.255.0
> !
> router bgp 2000
> bgp log-neighbor-changes
> bgp confederation identifier 10
> bgp confederation peers 2001
> network 2.2.2.0 mask 255.255.255.0
> neighbor 153.1.200.1 remote-as 1
> neighbor 153.1.200.1 send-community
> neighbor 153.1.200.3 remote-as 2001
> neighbor 153.1.200.3 next-hop-self
> neighbor 153.1.200.3 send-community
> !
> ip local pool mypool 153.1.111.134
> ip classless
> no ip http server
> !
> !
> map-class dialer dial1
> dialer callback-server username
> access-list 101 permit icmp any any
> dialer-list 1 protocol ip list 101
> !
> !
> alias exec i show ip route
> alias exec c show running-config
> alias exec o show ip ospf
> alias exec t config term
> alias exec b show ip int brief
> alias exec srb show run | begin
> !
> line con 0
> password cisco
> logging synchronous
> login
> line aux 0
> password cisco
> login
> line vty 0 4
> login
> !
> end
>
> r2#
> comm-server#3
> [Resuming connection 3 to r3 ... ]
>
> r3#c
> Building configuration...
>
> Current configuration : 1610 bytes
> !
> version 12.1
> no service single-slot-reload-enable
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname r3
> !
> logging rate-limit console 10 except errors
> !
> ip subnet-zero
> no ip finger
> !
> !
> key chain ccie
> key 1
> key-string cisco
> cns event-service server
> !
> !
> !
> !
> !
> interface Loopback0
> ip address 3.3.3.3 255.255.255.0
> ip ospf network point-to-point
> !
> interface Ethernet0
> ip address 153.1.43.33 255.255.255.128
> !
> interface Serial0
> ip address 153.1.200.3 255.255.255.0
> encapsulation frame-relay
> no ip mroute-cache
> no fair-queue
> frame-relay map ip 153.1.200.1 301 broadcast
> frame-relay map ip 153.1.200.2 301 broadcast
> frame-relay map ip 153.1.200.4 301 broadcast
> no frame-relay inverse-arp
> !
> interface Serial1
> ip address 153.1.53.67 255.255.255.128
> ip ospf message-digest-key 1 md5 cisco
> ip ospf network point-to-point
> !
> router bgp 2001
> bgp log-neighbor-changes
> bgp confederation identifier 10
> bgp confederation peers 2000
> network 3.3.3.0 mask 255.255.255.0
> neighbor 153.1.200.2 remote-as 2000
> neighbor 153.1.200.2 send-community
> !
> ip kerberos source-interface any
> ip classless
> ip http server
> !
> !
> alias exec b show ip int brief
> alias exec o show ip ospf
> alias exec t config term
> alias exec srb show run | begin
> alias exec sri show run | include
> alias exec i show ip route
> alias exec c show running-config
> !
> line con 0
> exec-timeout 0 0
> privilege level 15
> logging synchronous
> length 42
> transport input none
> line aux 0
> privilege level 15
> line vty 0 4
> exec-timeout 0 0
> privilege level 15
> logging synchronous
> no login
> length 42
> !
> end
>
> r3#
> comm-server#4
> [Resuming connection 4 to r4 ... ]
>
> r4#c
> Building configuration...
>
> Current configuration : 2370 bytes
> !
> version 12.1
> no service single-slot-reload-enable
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname r4
> !
> logging rate-limit console 10 except errors
> !
> username admin password 0 cisco
> username guest password 0 cisco
> username guest autocommand menu guestmenu
> username r1 password 0 cisco
> ip subnet-zero
> no ip finger
> ip tcp synwait-time 5
> no ip domain-lookup
> !
> isdn switch-type basic-ni
> cns event-service server
> !
> !
> !
> !
> !
> interface Loopback0
> ip address 4.4.4.4 255.255.255.0
> ip ospf network point-to-point
> !
> interface Ethernet0
> ip address 153.1.43.44 255.255.255.128
> !
> interface Serial0
> ip address 153.1.200.4 255.255.255.0
> encapsulation frame-relay
> no fair-queue
> frame-relay map ip 153.1.200.1 401 broadcast
> frame-relay map ip 153.1.200.2 401 broadcast
> frame-relay map ip 153.1.200.3 401 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type cisco
> !
> interface Serial1
> no ip address
> !
> interface BRI0
> ip address 153.1.111.134 255.255.255.252
> encapsulation ppp
> ip ospf authentication-key cisco
> ip ospf message-digest-key 1 md5 cisco
> ip ospf cost 9999
> ip ospf demand-circuit
> shutdown
> dialer map ip 153.1.111.133 name r1 broadcast 4930622 dialer-group 1
isdn
> switch-type basic-ni isdn spid1 81049306240101 4930624 isdn spid2
> 81049306250101 4930625 ppp authentication chap ! router bgp 1001 bgp
> log-neighbor-changes bgp confederation identifier 1 bgp confederation
> peers 1000 network 4.4.4.0 mask 255.255.255.0 neighbor 153.1.200.1
> remote-as 1000 neighbor 153.1.200.1 send-community ! ip kerberos
> source-interface any ip classless no ip http server ! access-list 8 permit
> 100.100.8.0 0.0.0.255 dialer-list 1 protocol ip permit ! menu guestmenu
text
> 1 look at the IP interfaces menu guestmenu command 1 show ip interface
menu
> guestmenu text 2 look at router version info menu guestmenu command 2 show
> version menu guestmenu text 3 quit menu guestmenu command 3 quit route-map
> noeight deny 10 match ip address 8 ! route-map noeight permit 20 ! !
alias
> exec i show ip route alias exec c show running-config alias exec b show ip
> int brief alias exec o show ip ospf alias exec t config term alias exec
srb
> show run | begin alias exec sri show run | include ! line con 0 password
> cisco logging synchronous login transport input none line aux 0 line
vty
> 0 4 password cisco login ! end
>
> r4#
>
> ----- Original Message -----
> From: "David Cho" <David.Cho@interealty.com>
> To: "'John Matijevic'" <matijevi@bellsouth.net>; <ccielab@groupstudy.com>
> Sent: Thursday, June 19, 2003 9:39 PM
> Subject: RE: bgp confederation peer,
>
>
> > John,
> >
> > Can you post full configs?
> >
> > -----Original Message-----
> > From: John Matijevic [mailto:matijevi@bellsouth.net]
> > Sent: Thursday, June 19, 2003 9:31 PM
> > To: David Cho; ccielab@groupstudy.com
> > Subject: Re: bgp confederation peer,
> >
> >
> > David,
> > Thanks for the response, I can ping between r2 and r3 they are
> > directly connected to each other. There is no igp from what I am
> > testing right now. Sincerely, Matijevic
> >
> > ----- Original Message -----
> > From: David Cho <mailto:David.Cho@interealty.com>
> > To: 'John Matijevic' <mailto:matijevi@bellsouth.net> ;
> > ccielab@groupstudy.com <mailto:ccielab@groupstudy.com>
> > Sent: Thursday, June 19, 2003 9:27 PM
> > Subject: RE: bgp confederation peer,
> >
> >
> > John,
> >
> > I suggest to check the neighbor addresses between r2 and r3. Is it
> directly
> > connected? Otherwise, you need update-s interface and ebgp-multi
> > commands assuming all your IGPs are fine. David
> >
> > -----Original Message-----
> > From: John Matijevic [ mailto:matijevi@bellsouth.net
> > <mailto:matijevi@bellsouth.net> ]
> > Sent: Thursday, June 19, 2003 9:17 PM
> > To: ccielab@groupstudy.com <mailto:ccielab@groupstudy.com>
> > Subject: bgp confederation peer,
> >
> >
> > Hello Team,
> > I am configuration confederations running BGP, I can successfully
> establish
> > a
> > peer with R1 and R4, However, I am having trouble establishing a peer
> > with R2 and R3, when I look at the sh ip bgp summ, on R3 I see an
> > opensent, when I look on R2, I see an openconfirm, and thats where it
> > seems to be stuck.
> Here
> >
> > are the configs for R2 and R3, everything looks ok, but who knows
> > after studying for 12 hours I may have mistyped something, but I did
> > redo the config. and it came up again any Help will be greatly
> > appreciated.!!! r2#srb r b router bgp 2000
> > bgp log-neighbor-changes
> > bgp confederation identifier 10
> > bgp confederation peers 2001
> > network 2.2.2.0 mask 255.255.255.0
> > neighbor 153.1.200.1 remote-as 1
> > neighbor 153.1.200.1 send-community
> > neighbor 153.1.200.3 remote-as 2001
> > neighbor 153.1.200.3 next-hop-self
> > neighbor 153.1.200.3 send-community
> > !
> > ip local pool mypool 153.1.111.134
> > ip classless
> > no ip http server
> > !
> > !
> > map-class dialer dial1
> > dialer callback-server username
> > access-list 101 permit icmp any any
> > dialer-list 1 protocol ip list 101
> > !
> > !
> > alias exec i show ip route
> >
> > r2#
> > comm-server#3
> > [Resuming connection 3 to r3 ... ]
> >
> > r3#srb r b
> > router bgp 2001
> > bgp log-neighbor-changes
> > bgp confederation identifier 10
> > bgp confederation peers 2000
> > network 3.3.3.0 mask 255.255.255.0
> > neighbor 153.1.200.2 remote-as 2000
> > neighbor 153.1.200.2 send-community
> > !
> > ip kerberos source-interface any
> > ip classless
> > ip http server
> > !
> > !
> > alias exec b show ip int brief
> > alias exec o show ip ospf
> > alias exec t config term
> > alias exec srb show run | begin
> > alias exec sri show run | include
> > alias exec i show ip route
> > alias exec c show running-config
> > !
> > line con 0
> > exec-timeout 0 0
> > privilege level 15
> > logging synchronous
> > length 42
> > transport input none
> > line aux 0
> > privilege level 15
> > line vty 0 4
> > exec-timeout 0 0
> > privilege level 15
> > logging synchronous
> > no login
> > length 42
> > !
> > end
> >
> > r3#
> >
> > Thanks again,
> > Matijevic
> >
> >
> > ______________________________________________________________________
> > _
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> > <http://www.groupstudy.com/list/CCIELab.html>
> >
> >
> > ______________________________________________________________________
> > _
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:02 GMT-3