pri interface config

From: Tom Young (gitsyoung@yahoo.co.jp)
Date: Tue Jun 17 2003 - 22:43:55 GMT-3

• Next message: yuki hisano: "FR PVC instablity(again)"
• Previous message: GSSecurity@dualccie.com: "RE: Email access over the Internet"
• Next in thread: Chris McCoy: "RE: pri interface config"
• Maybe reply: Chris McCoy: "RE: pri interface config"
• Maybe reply: Chemboth, Syamalendu: "RE: pri interface config"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi, group

    Look the segment of a config sample, it is running in
a company of my customer, S1/0 is a isdn pri interface for
user's dial-in, it is working now. but, it said interface
Serial1/0:23 , Why 0:23 ? Why use 23 ?

controller T1 1/0
 framing esf
 linecode b8zs
 pri-group timeslots 1-24
!
controller T1 1/1
!
!
interface Serial1/0:23
 ip address 10.104.100.254 255.255.255.0
 encapsulation ppp
 dialer-group 1
 isdn switch-type primary-ntt

• Next message: yuki hisano: "FR PVC instablity(again)"
• Previous message: GSSecurity@dualccie.com: "RE: Email access over the Internet"
• Next in thread: Chris McCoy: "RE: pri interface config"
• Maybe reply: Chris McCoy: "RE: pri interface config"
• Maybe reply: Chemboth, Syamalendu: "RE: pri interface config"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:59 GMT-3