From: Chemboth, Syamalendu (Chemboth.Syamalendu@conocophillips.com)
Date: Wed Jun 18 2003 - 04:51:13 GMT-3
Hi Tom,
Interface serial 1/0:23 corresponds to your D channel . It is in D channel that you make all your protocol related configurations
-----Original Message-----
From: Tom Young [mailto:gitsyoung@yahoo.co.jp]
Sent: Wednesday, June 18, 2003 5:44 AM
To: ccielab@groupstudy.com
Subject: pri interface config
Hi, group
Look the segment of a config sample, it is running in
a company of my customer, S1/0 is a isdn pri interface for
user's dial-in, it is working now. but, it said interface
Serial1/0:23 , Why 0:23 ? Why use 23 ?
controller T1 1/0
framing esf
linecode b8zs
pri-group timeslots 1-24
!
controller T1 1/1
!
!
interface Serial1/0:23
ip address 10.104.100.254 255.255.255.0
encapsulation ppp
dialer-group 1
isdn switch-type primary-ntt
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:11:00 GMT-3