From: Emad (emad@zakq8.com)
Date: Sat Jun 14 2003 - 16:41:44 GMT-3
Folks,
I was doing multicast scenario and I enabled multicast routing globally but I
didn't find the multicast commands like IP pim or cgmp under the physical
interfaces and I found them under the vlan interfaces only
this is the info of my switch
sh ver
Cisco Internetwork Operating System Software
IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version 12.1(12c)EA1, RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Mon 25-Nov-02 00:07 by antonino
Image text-base: 0x00003000, data-base: 0x0075FE48
ROM: Bootstrap program is C3550 boot loader
Down-Backbone uptime is 5 hours, 14 minutes
System returned to ROM by power-on
System image file is
"flash:c3550-i5q3l2-mz.121-12c.EA1/c3550-i5q3l2-mz.121-12c.EA1.bin"
cisco WS-C3550-24 (PowerPC) processor (revision H0) with 65526K/8192K bytes of
memory.
Processor board ID CAT0706Y0R9
Last reset from warm-reset
Bridging software.
Running Layer2/3 Switching Image
Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces
Plz advise
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:58 GMT-3