From: kasturi cisco (kasturi_cisco@hotmail.com)
Date: Tue Jun 10 2003 - 20:30:13 GMT-3
Beda,
Here is my configs: (Maybe by now u have got it working).here is my
working config.
dlsw local-peer peer-id 153.1.200.5
dlsw remote-peer 0 frame-relay interface Serial0.2 104
dlsw bridge-group 1
!
interface Loopback0
ip address 153.1.200.5 255.255.255.240
!
interface Ethernet0
no ip address
bridge-group 1
!
interface Serial0.2 multipoint
ip address 153.1.200.129 255.255.255.240
ip ospf network point-to-multipoint
ip ospf priority 100
frame-relay map llc2 104 broadcast
frame-relay map ip 153.1.200.129 103
frame-relay map ip 153.1.200.130 103 broadcast
frame-relay map ip 153.1.200.131 104 broadcast
!router ospf 100
router-id 153.1.200.5
log-adjacency-changes
network 153.1.200.129 0.0.0.0 area 0
!
ip classless
ip http server
!
!
bridge 1 protocol ieee
R5#w peers
Peers: state pkts_rx pkts_tx type drops ckts TCP
uptime
LLC2 Se0.2 104 CONNECT 99 164 conf 0 3 -
00:45:25
Total number of connected peers: 1
Total number of connections: 1
R5#show dlsw circuits
Index local addr(lsap) remote addr(dsap) state
uptime
671088703 0200.0808.a8a8(0C) 0200.eca2.2222(0C)
CKT_START -
2466250816 0200.0808.a8a8(08) 0200.eca2.2222(08)
CKT_START -
83886145 0200.0808.a8a8(04) 0200.eca2.2222(04)
CKT_START -
R5#o neighNeighbor ID Pri State Dead Time
Address Interface
153.1.200.130 0 FULL/ - 00:01:47 153.1.200.130
Serial0.2
153.1.200.131 0 FULL/ - 00:01:37 153.1.200.131
Serial0.2
R5#o int s0.2
Serial0.2 is up, line protocol is up
Internet Address 153.1.200.129/28, Area 0
Process ID 100, Router ID 153.1.200.5, Network Type POINT_TO_MULTIPOINT,
Cost: 64
Transmit Delay is 1 sec, State POINT_TO_MULTIPOINT,
Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
Hello due in 00:00:00
Index 1/1, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 2
Last flood scan time is 4 msec, maximum is 4 msec
Neighbor Count is 2, Adjacent neighbor count is 2
Adjacent with neighbor 153.1.200.130
Adjacent with neighbor 153.1.200.131
Suppress hello for 0 neighbor(s)
R5#=======================hostname R10
!dlsw local-peer peer-id 153.1.4.4
dlsw remote-peer 0 frame-relay interface Serial0 401
dlsw bridge-group 1
!
!
interface Loopback10
ip address 153.1.4.4 255.255.255.0
!
interface Ethernet0
no ip address
bridge-group 1
!
interface Serial0
ip address 153.1.200.131 255.255.255.240
encapsulation frame-relay
ip ospf network point-to-multipoint
ip ospf priority 0
no arp frame-relay
frame-relay map llc2 401 broadcast
frame-relay map ip 153.1.200.129 401 broadcast
frame-relay map ip 153.1.200.130 401
frame-relay map ip 153.1.200.131 401
no frame-relay inverse-arp
!
router ospf 100
router-id 153.1.200.131
log-adjacency-changes
network 153.1.200.0 0.0.0.255 area 0
!
bridge 1 protocol ieee
Hope that helps.Were u able to get it working. Bye,
Kasturi.
------------------------------------------------------------------------
Watch Hallmark. Enjoy cool movies. Win hot prizes!
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:56 GMT-3