RE: 3550 globally root switch command?

From: Jonathan V Hays (jhays@jtan.com)
Date: Tue Jun 10 2003 - 18:08:26 GMT-3

• Next message: kasturi cisco: "Re: dlsw lite"
• Previous message: kasturi cisco: "RE: Strange quirk in Dynamic ACLs?!?! Interesting Resuls !"
• Maybe in reply to: Richard Davidson: "3550 globally root switch command?"
• Next in thread: Snow, Tim: "RE: 3550 globally root switch command?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

See below.

s2_3550#conf t
Enter configuration commands, one per line. End with CNTL/Z.
s2_3550(config)#spanning-tree vlan 1-4094 root primary
s2_3550(config)#

> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of Richard Davidson
> Sent: Tuesday, June 10, 2003 1:08 PM
> To: groupstudy
> Subject: 3550 globally root switch command?
>
>
> 3550 globally root switch command?
> Is there a global command that will enable a cat 3550
> to be the root for all vlans. The spanning-tree vlan
> command requires you to type in for all vlans.
> Rich

• Next message: kasturi cisco: "Re: dlsw lite"
• Previous message: kasturi cisco: "RE: Strange quirk in Dynamic ACLs?!?! Interesting Resuls !"
• Maybe in reply to: Richard Davidson: "3550 globally root switch command?"
• Next in thread: Snow, Tim: "RE: 3550 globally root switch command?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:56 GMT-3