From: beda jain (bpjain@cisco.com)
Date: Fri Jun 13 2003 - 17:28:30 GMT-3
Hi,
i am able to make it work but whenever i change any thing on dlsw lite
for multi point
i have to reload the router to make it work. I am not using real router. i
am using ios-on-unix.
Thanks,
Beda
At 11:30 PM 6/10/2003 +0000, kasturi cisco wrote:
>Beda,
>
>Here is my configs: (Maybe by now u have got it working).here is my
>working config.
>
>dlsw local-peer peer-id 153.1.200.5
>dlsw remote-peer 0 frame-relay interface Serial0.2 104
>dlsw bridge-group 1
>!
>interface Loopback0
> ip address 153.1.200.5 255.255.255.240
>!
>interface Ethernet0
> no ip address
> bridge-group 1
>!
>interface Serial0.2 multipoint
> ip address 153.1.200.129 255.255.255.240
> ip ospf network point-to-multipoint
> ip ospf priority 100
> frame-relay map llc2 104 broadcast
> frame-relay map ip 153.1.200.129 103
> frame-relay map ip 153.1.200.130 103 broadcast
> frame-relay map ip 153.1.200.131 104 broadcast
>!
>router ospf 100
> router-id 153.1.200.5
> log-adjacency-changes
> network 153.1.200.129 0.0.0.0 area 0
>!
>ip classless
>ip http server
>!
>!
>bridge 1 protocol ieee
>
>R5#w peers
>Peers: state pkts_rx pkts_tx type drops ckts
>TCP uptime
> LLC2 Se0.2 104 CONNECT 99 164 conf 0 3 -
> 00:45:25
>Total number of connected peers: 1
>Total number of connections: 1
>
>R5#show dlsw circuits
>Index local addr(lsap) remote addr(dsap) state uptime
>671088703 0200.0808.a8a8(0C) 0200.eca2.2222(0C) CKT_START -
>2466250816 0200.0808.a8a8(08) 0200.eca2.2222(08) CKT_START -
>83886145 0200.0808.a8a8(04) 0200.eca2.2222(04) CKT_START -
>
>R5#o neigh
>Neighbor ID Pri State Dead Time Address Interface
>153.1.200.130 0 FULL/ - 00:01:47 153.1.200.130 Serial0.2
>153.1.200.131 0 FULL/ - 00:01:37 153.1.200.131 Serial0.2
>R5#o int s0.2
>Serial0.2 is up, line protocol is up
> Internet Address 153.1.200.129/28, Area 0
> Process ID 100, Router ID 153.1.200.5, Network Type
> POINT_TO_MULTIPOINT, Cost: 64
> Transmit Delay is 1 sec, State POINT_TO_MULTIPOINT,
> Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
> Hello due in 00:00:00
> Index 1/1, flood queue length 0
> Next 0x0(0)/0x0(0)
> Last flood scan length is 1, maximum is 2
> Last flood scan time is 4 msec, maximum is 4 msec
> Neighbor Count is 2, Adjacent neighbor count is 2
> Adjacent with neighbor 153.1.200.130
> Adjacent with neighbor 153.1.200.131
> Suppress hello for 0 neighbor(s)
>R5#
>=======================
>hostname R10
>!
>dlsw local-peer peer-id 153.1.4.4
>dlsw remote-peer 0 frame-relay interface Serial0 401
>dlsw bridge-group 1
>!
>!
>interface Loopback10
> ip address 153.1.4.4 255.255.255.0
>!
>interface Ethernet0
> no ip address
> bridge-group 1
>!
>interface Serial0
> ip address 153.1.200.131 255.255.255.240
> encapsulation frame-relay
> ip ospf network point-to-multipoint
> ip ospf priority 0
> no arp frame-relay
> frame-relay map llc2 401 broadcast
> frame-relay map ip 153.1.200.129 401 broadcast
> frame-relay map ip 153.1.200.130 401
> frame-relay map ip 153.1.200.131 401
> no frame-relay inverse-arp
>!
>router ospf 100
> router-id 153.1.200.131
> log-adjacency-changes
> network 153.1.200.0 0.0.0.255 area 0
>!
>bridge 1 protocol ieee
>Hope that helps.Were u able to get it working.
>
>Bye,
>Kasturi.
>
>
>----------
>Watch Hallmark. Enjoy cool movies.
><http://g.msn.com/8HMMENIN/2755??PS=>Win hot prizes!
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:58 GMT-3