From: Daniel Cisco Group Study (danielcgs@imc.net.au)
Date: Sat Jun 14 2003 - 03:56:03 GMT-3
What's ios-on-unix? Never heard of it....
Daniel
-----Original Message-----
From: beda jain [mailto:bpjain@cisco.com]
Sent: Saturday, 14 June 2003 06:29
To: kasturi cisco; ccielab@groupstudy.com
Subject: Re: dlsw lite
Hi,
i am able to make it work but whenever i change any thing on dlsw lite
for multi point
i have to reload the router to make it work. I am not using real router. i am using ios-on-unix.
Thanks,
Beda
At 11:30 PM 6/10/2003 +0000, kasturi cisco wrote:
>Beda,
>
>Here is my configs: (Maybe by now u have got it working).here is my
>working config.
>
>dlsw local-peer peer-id 153.1.200.5
>dlsw remote-peer 0 frame-relay interface Serial0.2 104
>dlsw bridge-group 1
>!
>interface Loopback0
> ip address 153.1.200.5 255.255.255.240
>!
>interface Ethernet0
> no ip address
> bridge-group 1
>!
>interface Serial0.2 multipoint
> ip address 153.1.200.129 255.255.255.240
> ip ospf network point-to-multipoint
> ip ospf priority 100
> frame-relay map llc2 104 broadcast
> frame-relay map ip 153.1.200.129 103
> frame-relay map ip 153.1.200.130 103 broadcast
> frame-relay map ip 153.1.200.131 104 broadcast
>!
>router ospf 100
> router-id 153.1.200.5
> log-adjacency-changes
> network 153.1.200.129 0.0.0.0 area 0
>!
>ip classless
>ip http server
>!
>!
>bridge 1 protocol ieee
>
>R5#w peers
>Peers: state pkts_rx pkts_tx type drops ckts
>TCP uptime
> LLC2 Se0.2 104 CONNECT 99 164 conf 0 3 - > 00:45:25
>Total number of connected peers: 1
>Total number of connections: 1
>
>R5#show dlsw circuits
>Index local addr(lsap) remote addr(dsap) state uptime
>671088703 0200.0808.a8a8(0C) 0200.eca2.2222(0C) CKT_START -
>2466250816 0200.0808.a8a8(08) 0200.eca2.2222(08) CKT_START -
>83886145 0200.0808.a8a8(04) 0200.eca2.2222(04) CKT_START -
>
>R5#o neigh
>Neighbor ID Pri State Dead Time Address Interface
>153.1.200.130 0 FULL/ - 00:01:47 153.1.200.130 Serial0.2
>153.1.200.131 0 FULL/ - 00:01:37 153.1.200.131 Serial0.2
>R5#o int s0.2
>Serial0.2 is up, line protocol is up
> Internet Address 153.1.200.129/28, Area 0
> Process ID 100, Router ID 153.1.200.5, Network Type
> POINT_TO_MULTIPOINT, Cost: 64
> Transmit Delay is 1 sec, State POINT_TO_MULTIPOINT,
> Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
> Hello due in 00:00:00
> Index 1/1, flood queue length 0
> Next 0x0(0)/0x0(0)
> Last flood scan length is 1, maximum is 2
> Last flood scan time is 4 msec, maximum is 4 msec
> Neighbor Count is 2, Adjacent neighbor count is 2
> Adjacent with neighbor 153.1.200.130
> Adjacent with neighbor 153.1.200.131
> Suppress hello for 0 neighbor(s)
>R5#
>=======================
>hostname R10
>!
>dlsw local-peer peer-id 153.1.4.4
>dlsw remote-peer 0 frame-relay interface Serial0 401
>dlsw bridge-group 1
>!
>!
>interface Loopback10
> ip address 153.1.4.4 255.255.255.0
>!
>interface Ethernet0
> no ip address
> bridge-group 1
>!
>interface Serial0
> ip address 153.1.200.131 255.255.255.240
> encapsulation frame-relay
> ip ospf network point-to-multipoint
> ip ospf priority 0
> no arp frame-relay
> frame-relay map llc2 401 broadcast
> frame-relay map ip 153.1.200.129 401 broadcast
> frame-relay map ip 153.1.200.130 401
> frame-relay map ip 153.1.200.131 401
> no frame-relay inverse-arp
>!
>router ospf 100
> router-id 153.1.200.131
> log-adjacency-changes
> network 153.1.200.0 0.0.0.255 area 0
>!
>bridge 1 protocol ieee
>Hope that helps.Were u able to get it working.
>
>Bye,
>Kasturi.
>
>
>----------
>Watch Hallmark. Enjoy cool movies.
><http://g.msn.com/8HMMENIN/2755??PS=>Win hot prizes!
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
This footnote also confirms that this email message has been swept by
MIMEsweeper for the presence of computer viruses.
www.mimesweeper.com
**********************************************************************
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:58 GMT-3