From: kasturi cisco (kasturi_cisco@hotmail.com)
Date: Sat Jun 14 2003 - 10:52:36 GMT-3
Its used by Cisco internally..very similiar to Cisco IOS with most of the
features.Used for testing purposes too.
Good Luck,
Kasturi.
>From: "Daniel Cisco Group Study" >Reply-To: "Daniel Cisco Group Study"
>To: "beda jain" , "kasturi cisco" , >Subject: RE: dlsw lite >Date: Sat,
14 Jun 2003 16:56:03 +1000 > >What's ios-on-unix? Never heard of it.... >
>Daniel > > >-----Original Message----- >From: beda jain
[mailto:bpjain@cisco.com] >Sent: Saturday, 14 June 2003 06:29 >To:
kasturi cisco; ccielab@groupstudy.com >Subject: Re: dlsw lite > > >Hi, >
i am able to make it work but whenever i change any thing on dlsw lite
>for multi point > >i have to reload the router to make it work. I am not
using real router. i am using ios-on-unix. > > > >Thanks, >Beda > > >At
11:30 PM 6/10/2003 +0000, kasturi cisco wrote: > >Beda, > > > >Here is my
configs: (Maybe by now u have got it working).here is my > >working
config. > > > >dlsw local-peer peer-id 153.1.200.5 > >dlsw remote-peer 0
frame-relay interface Serial0.2 104 > >dlsw bridge-group 1 > >! >
>interface Loopback0 > > ip address 153.1.200.5 255.255.255.240 > >! >
>interface Ethernet0 > > no ip address > > bridge-group 1 > >! >
>interface Serial0.2 multipoint > > ip address 153.1.200.129
255.255.255.240 > > ip ospf network point-to-multipoint > > ip ospf
priority 100 > > frame-relay map llc2 104 broadcast > > frame-relay map
ip 153.1.200.129 103 > > frame-relay map ip 153.1.200.130 103 broadcast >
> frame-relay map ip 153.1.200.131 104 broadcast > >! > >router ospf 100
> > router-id 153.1.200.5 > > log-adjacency-changes > > network
153.1.200.129 0.0.0.0 area 0 > >! > >ip classless > >ip http server > >!
> >! > >bridge 1 protocol ieee > > > >R5#w peers > >Peers: state pkts_rx
pkts_tx type drops ckts > >TCP uptime > > LLC2 Se0.2 104 CONNECT 99 164
conf 0 3 - > 00:45:25 > >Total number of connected peers: 1 > >Total
number of connections: 1 > > > >R5#show dlsw circuits > >Index local
addr(lsap) remote addr(dsap) state uptime > >671088703 0200.0808.a8a8(0C)
0200.eca2.2222(0C) CKT_START - > >2466250816 0200.0808.a8a8(08)
0200.eca2.2222(08) CKT_START - > >83886145 0200.0808.a8a8(04)
0200.eca2.2222(04) CKT_START - > > > >R5#o neigh > >Neighbor ID Pri State
Dead Time Address Interface > >153.1.200.130 0 FULL/ - 00:01:47
153.1.200.130 Serial0.2 > >153.1.200.131 0 FULL/ - 00:01:37 153.1.200.131
Serial0.2 > >R5#o int s0.2 > >Serial0.2 is up, line protocol is up > >
Internet Address 153.1.200.129/28, Area 0 > > Process ID 100, Router ID
153.1.200.5, Network Type > > POINT_TO_MULTIPOINT, Cost: 64 > > Transmit
Delay is 1 sec, State POINT_TO_MULTIPOINT, > > Timer intervals
configured, Hello 30, Dead 120, Wait 120, Retransmit 5 > > Hello due in
00:00:00 > > Index 1/1, flood queue length 0 > > Next 0x0(0)/0x0(0) > >
Last flood scan length is 1, maximum is 2 > > Last flood scan time is 4
msec, maximum is 4 msec > > Neighbor Count is 2, Adjacent neighbor count
is 2 > > Adjacent with neighbor 153.1.200.130 > > Adjacent with neighbor
153.1.200.131 > > Suppress hello for 0 neighbor(s) > >R5# >
>======================= > >hostname R10 > >! > >dlsw local-peer peer-id
153.1.4.4 > >dlsw remote-peer 0 frame-relay interface Serial0 401 > >dlsw
bridge-group 1 > >! > >! > >interface Loopback10 > > ip address 153.1.4.4
255.255.255.0 > >! > >interface Ethernet0 > > no ip address > >
bridge-group 1 > >! > >interface Serial0 > > ip address 153.1.200.131
255.255.255.240 > > encapsulation frame-relay > > ip ospf network
point-to-multipoint > > ip ospf priority 0 > > no arp frame-relay > >
frame-relay map llc2 401 broadcast > > frame-relay map ip 153.1.200.129
401 broadcast > > frame-relay map ip 153.1.200.130 401 > > frame-relay
map ip 153.1.200.131 401 > > no frame-relay inverse-arp > >! > >router
ospf 100 > > router-id 153.1.200.131 > > log-adjacency-changes > >
network 153.1.200.0 0.0.0.255 area 0 > >! > >bridge 1 protocol ieee >
>Hope that helps.Were u able to get it working. > > > >Bye, > >Kasturi. >
> > > > >---------- > >Watch Hallmark. Enjoy cool movies. > >Win hot
prizes! > >
>**********************************************************************
>This email and any files transmitted with it are confidential and
>intended solely for the use of the individual or entity to whom they
>are addressed. If you have received this email in error please notify
>the system manager. >This footnote also confirms that this email message
has been swept by >MIMEsweeper for the presence of computer viruses.
>www.mimesweeper.com
>**********************************************************************
------------------------------------------------------------------------
ICICI's NRI services. They make life easy. Find out more
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:58 GMT-3