RE: Multicast Auto RP

From: Brown, Patrick (NSOC-OCF} (PBrown4@chartercom.com)
Date: Wed Jun 04 2003 - 12:50:16 GMT-3

• Next message: John Matijevic: "ATM"
• Previous message: MMoniz: "RE: Multicast Auto RP"
• Maybe in reply to: Pita40: "Multicast Auto RP"
• Next in thread: Scott M. Livingston: "RE: Multicast Auto RP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

One is to configure router to be the RP for specified group, the other is to
configure the router to be a mapping agent. If you want router to be
both(such in auto-rp over frame with only sparse-mode), then you can
configure both commands.

Patrick B
-----Original Message-----
From: Pita40 [mailto:pita40@hotmail.com]
Sent: Wednesday, June 04, 2003 9:38 AM
To: ccielab@groupstudy.com
Subject: Multicast Auto RP

Group,

Do you need both commands below to configure Auto RP

ip pim send-rp-announce ethernet0 scope
and
ip pim send-rp-discovery scope

• Next message: John Matijevic: "ATM"
• Previous message: MMoniz: "RE: Multicast Auto RP"
• Maybe in reply to: Pita40: "Multicast Auto RP"
• Next in thread: Scott M. Livingston: "RE: Multicast Auto RP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:52 GMT-3