From: MMoniz (ccie2002@tampabay.rr.com)
Date: Wed Jun 04 2003 - 12:45:31 GMT-3
Yes, the first command is for the RP itself, the second is for the
RP-mapping agent. This can be
the same router or a different router depending on the topology.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Pita40
Sent: Wednesday, June 04, 2003 10:38 AM
To: ccielab@groupstudy.com
Subject: Multicast Auto RP
Group,
Do you need both commands below to configure Auto RP
ip pim send-rp-announce ethernet0 scope
and
ip pim send-rp-discovery scope
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:52 GMT-3