From: Scott M. Livingston (scottl@sprinthosting.net)
Date: Wed Jun 04 2003 - 12:52:25 GMT-3
That is how I have always set it up.... Whether I was setting up the
mapping agent and RP on dif routers or the same.
-scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Pita40
Sent: Wednesday, June 04, 2003 9:38 AM
To: ccielab@groupstudy.com
Subject: Multicast Auto RP
Group,
Do you need both commands below to configure Auto RP
ip pim send-rp-announce ethernet0 scope
and
ip pim send-rp-discovery scope
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:52 GMT-3