From: Jeongwoo Park (jpark@wams.com)
Date: Tue May 27 2003 - 00:50:41 GMT-3
Brian,
I know that your way works.
However, what I am trying is to combine with DLSW lite encap.
So, I had to try this way.
R2;
dlsw local-peer peer-id 192.168.2.2
dlsw remote-peer 0 frame-relay interface Serial0/0 201
dlsw bridge-group 1
interface Serial0/0
ip address 172.16.123.2 255.255.255.0
encapsulation frame-relay
frame-relay map llc2 201 broadcast
R1;
dlsw local-peer peer-id 172.16.10.1
dlsw remote-peer 0 frame-relay interface Serial0/0.123 102
dlsw bridge-group 1
interface Serial0/0.123 multipoint
ip address 172.16.123.1 255.255.255.0
frame-relay map llc2 102 broadcast
Shouldn't this work?
JP
-----Original Message-----
From: Brian Dennis [mailto:brian@labforge.com]
Sent: Monday, May 26, 2003 8:37 PM
To: 'Jeongwoo Park'; 'lab'
Cc: 'FATHALLAH'; 'Cameron, John'
Subject: RE: OSPF Neighboring with DLSW Lite Encap
Your Frame-relay mappings do not look incorrect. Can you ping from R1 to
R2?
If not try this:
R2;
interface Serial0/0
ip address 172.16.123.2 255.255.255.0
encapsulation frame-relay
frame-relay map ip 172.16.123.1 201 broadcast
R1;
interface Serial0/0.123 multipoint
ip address 172.16.123.1 255.255.255.0
frame-relay map ip 172.16.123.2 102 broadcast
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
-----Original Message-----
From: Jeongwoo Park [mailto:jpark@wams.com]
Sent: Monday, May 26, 2003 8:31 PM
To: 'Brian Dennis'; lab
Cc: 'FATHALLAH'; 'Cameron, John'
Subject: RE: OSPF Neighboring with DLSW Lite Encap
I am still not getting ospf neighbor up.
Interestingly, I get the DLSW peering up.
R2;
interface Serial0/0
backup delay 0 10
backup interface BRI0/0
ip address 172.16.123.2 255.255.255.0
encapsulation frame-relay
ip ospf message-digest-key 1 md5 cisco
ip ospf network point-to-multipoint
no fair-queue
frame-relay map llc2 201 broadcast
frame-relay map ip 172.16.123.2 201 broadcast
frame-relay map ip 172.16.123.3 201 broadcast
no frame-relay inverse-arp
R1;
interface Serial0/0.123 multipoint
ip address 172.16.123.1 255.255.255.0
ip ospf message-digest-key 1 md5 cisco
ip ospf network point-to-multipoint
frame-relay map llc2 102 broadcast
frame-relay map ip 172.16.123.1 102 broadcast
frame-relay map ip 172.16.123.3 103 broadcast
no frame-relay inverse-arp
============================================
1d22h: %OSPF-5-ADJCHG: Process 1, Nbr 192.168.1.1 on Serial0/0 from
EXSTART
to DOWN, Neighbor Down: Too many DBD retransmitions
--More--
1d22h: %OSPF-5-ADJCHG: Process 1, Nbr 192.168.1.1 on Serial0/0 from DOWN
to
DOWN, Neighbor Down: Ignore timer expired
-----Original Message-----
From: Brian Dennis [mailto:brian@labforge.com]
Sent: Sunday, May 25, 2003 6:59 PM
To: 'Jeongwoo Park'; 'lab'
Subject: RE: OSPF Neighboring with DLSW Lite Encap
On R2 you do not have the broadcast keyword on the Frame-relay map
statements. Init state means you are receiving hellos from the remote
end but you are not seeing your own router ID in the hellos.
Also there is no need for the "ip ospf priority 0" command with a
point-to-multipoint OSPF network.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jeongwoo Park
Sent: Sunday, May 25, 2003 5:01 PM
To: lab
Subject: OSPF Neighboring with DLSW Lite Encap
Hi all.
Here is the problem I have.
R2(spoke)-----------R1(Hub)
They are running ospf.
I don't get the neighboring between these two routers.
It is stuck in INIT stage.
R2;
interface Serial0/0
backup delay 0 10
backup interface BRI0/0
ip address 172.16.123.2 255.255.255.0
encapsulation frame-relay
ip ospf message-digest-key 1 md5 cisco
ip ospf network point-to-multipoint
ip ospf priority 0
no fair-queue
frame-relay map llc2 201 broadcast
frame-relay map ip 172.16.123.2 201
frame-relay map ip 172.16.123.3 201
no frame-relay inverse-arp
R1:
interface Serial0/0.123 multipoint
ip address 172.16.123.1 255.255.255.0
ip ospf message-digest-key 1 md5 cisco
ip ospf network point-to-multipoint
frame-relay map llc2 102 broadcast
frame-relay map ip 172.16.123.1 102 broadcast
frame-relay map ip 172.16.123.3 103 broadcast
no frame-relay inverse-arp
r2#sh ip ospf nei
Neighbor ID Pri State Dead Time Address
192.168.1.1 1 INIT/ - 00:01:35 172.16.123.1
r2#
If you need more configs, let me know.
Any idea why this fails with the neighboring?
Thanks
JP
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:48 GMT-3