From: Jeongwoo Park (jpark@wams.com)
Date: Sun May 25 2003 - 21:01:14 GMT-3
Hi all.
Here is the problem I have.
R2(spoke)-----------R1(Hub)
They are running ospf.
I don't get the neighboring between these two routers.
It is stuck in INIT stage.
R2;
interface Serial0/0
backup delay 0 10
backup interface BRI0/0
ip address 172.16.123.2 255.255.255.0
encapsulation frame-relay
ip ospf message-digest-key 1 md5 cisco
ip ospf network point-to-multipoint
ip ospf priority 0
no fair-queue
frame-relay map llc2 201 broadcast
frame-relay map ip 172.16.123.2 201
frame-relay map ip 172.16.123.3 201
no frame-relay inverse-arp
R1:
interface Serial0/0.123 multipoint
ip address 172.16.123.1 255.255.255.0
ip ospf message-digest-key 1 md5 cisco
ip ospf network point-to-multipoint
frame-relay map llc2 102 broadcast
frame-relay map ip 172.16.123.1 102 broadcast
frame-relay map ip 172.16.123.3 103 broadcast
no frame-relay inverse-arp
r2#sh ip ospf nei
Neighbor ID Pri State Dead Time Address
192.168.1.1 1 INIT/ - 00:01:35 172.16.123.1
r2#
If you need more configs, let me know.
Any idea why this fails with the neighboring?
Thanks
JP
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:47 GMT-3