Dialer load-threshold question

From: Danny.Andaluz@triaton-na.com
Date: Mon May 26 2003 - 20:15:49 GMT-3

Hello, Group. On BRI interfaces is the dialer load threshold based on 1 B channel at 64k or 2 at 128k?
 
interface bri0
dialer load-threshold 128 either
 
I would think with the above, if the first b channel reaches half of the max capacity, then it should dial up the second channel. This is the way I have always configured it on production routers. It seems to work correctly when tested with pings to the remote BRI.
 
I looked at the ISDN sections on the doc CD on the website and there is nothing definitive there.
 
Thanks,
Danny

This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:48 GMT-3