From: Brian Dennis (brian@labforge.com)
Date: Sun May 25 2003 - 17:27:58 GMT-3
Boot the router to 0x2101. Then erase the flash partitions and remove
the partition command from the global config.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Emad
Sent: Sunday, May 25, 2003 11:25 AM
To: CCIE LAB (E-mail)
Subject: flash partitions
Folks,
I have two partitions of flash (each is 8 M) and I want to combine them
together to be seen as one modul 16 M flash , how can I do that?
sh ver
Cisco Internetwork Operating System Software
IOS (tm) 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-1995 by cisco Systems, Inc.
Compiled Tue 24-Oct-95 15:46 by mkamson
Image text-base: 0x01020000, data-base: 0x00001000
ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
R9 uptime is 25 minutes
System restarted by reload
Running default software
cisco 2500 (68030) processor (revision D) with 8188K/2048K bytes of
memory.
Processor board serial number 01534702 with hardware revision 00000000
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash partition 1 (Read/Write)
8192K bytes of processor board System flash partition 2 (Read/Write)
Configuration register is 0x2101
thanx
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:47 GMT-3