flash partitions

From: Emad (emad@zakq8.com)
Date: Sun May 25 2003 - 15:24:36 GMT-3

• Next message: Ivy Zhang: "How to filter all of DLSW traffic?"
• Previous message: Tom Young: "update to ebgp"
• Next in thread: Georg Pauwen: "Re: flash partitions"
• Maybe reply: Georg Pauwen: "Re: flash partitions"
• Maybe reply: Brian Dennis: "RE: flash partitions"
• Maybe reply: Tony Schaffran: "RE: flash partitions"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Folks,
I have two partitions of flash (each is 8 M) and I want to combine them together to be seen as one modul 16 M flash , how can I do that?

sh ver
Cisco Internetwork Operating System Software
IOS (tm) 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1995 by cisco Systems, Inc.
Compiled Tue 24-Oct-95 15:46 by mkamson
Image text-base: 0x01020000, data-base: 0x00001000

ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE

R9 uptime is 25 minutes
System restarted by reload
Running default software

cisco 2500 (68030) processor (revision D) with 8188K/2048K bytes of memory.
Processor board serial number 01534702 with hardware revision 00000000
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash partition 1 (Read/Write)
8192K bytes of processor board System flash partition 2 (Read/Write)

Configuration register is 0x2101

thanx

• Next message: Ivy Zhang: "How to filter all of DLSW traffic?"
• Previous message: Tom Young: "update to ebgp"
• Next in thread: Georg Pauwen: "Re: flash partitions"
• Maybe reply: Georg Pauwen: "Re: flash partitions"
• Maybe reply: Brian Dennis: "RE: flash partitions"
• Maybe reply: Tony Schaffran: "RE: flash partitions"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:47 GMT-3