From: Frank B (frank@buff-net.com)
Date: Fri May 23 2003 - 05:58:42 GMT-3
Where you have the svc nsap below, ensure you place the nsap from the
router at the other end of your svc.
You can verify it's working by using show atm ilmi-status
You should see ilmi state: UpandNormal
And after the registered esi address it should say (confirmed)
Frank
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Lin Xiaodong
Sent: Thursday, May 22, 2003 7:47 PM
To: ccielab@groupstudy.com
Subject: ATM SVC
hi boddies,
I config the atm svc as following but why i cannot always ping the
remote end successfully ?
maybe somewhere is wrong ? who can help me ? my config as follows
int atm 2/0
ip add 172.16.1.1 255.255.255.0
atm esi-add xxxx.xxxx.xxxx.00
pvc 0/16 ilmi
!
pvc 0/5 qusaal
!
atm ilmi-keepalive
!
atm arp-server self
!
svc nsap xx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.00
proto ip 172.16.1.2 bro
enc aal5snap
!
thanks in advance
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:46 GMT-3