From: Silvio Nunes (silvio_98@hotmail.com)
Date: Fri May 23 2003 - 09:04:37 GMT-3
Hi,
How Can I configure my ATM Lighstream to works with Classical IP to test
this ??
Regards,
>From: "Frank B" <frank@buff-net.com>
>Reply-To: "Frank B" <frank@buff-net.com>
>To: "'Lin Xiaodong'" <Linxiaodong@21Vianet.com>
>CC: <ccielab@groupstudy.com>
>Subject: RE: ATM SVC
>Date: Thu, 22 May 2003 22:58:42 -1000
>
>Where you have the svc nsap below, ensure you place the nsap from the
>router at the other end of your svc.
>
>You can verify it's working by using show atm ilmi-status
>
>You should see ilmi state: UpandNormal
>And after the registered esi address it should say (confirmed)
>
>Frank
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>Lin Xiaodong
>Sent: Thursday, May 22, 2003 7:47 PM
>To: ccielab@groupstudy.com
>Subject: ATM SVC
>
>hi boddies,
>I config the atm svc as following but why i cannot always ping the
>remote end successfully ?
>maybe somewhere is wrong ? who can help me ? my config as follows
>
>int atm 2/0
> ip add 172.16.1.1 255.255.255.0
> atm esi-add xxxx.xxxx.xxxx.00
> pvc 0/16 ilmi
> !
> pvc 0/5 qusaal
> !
> atm ilmi-keepalive
> !
> atm arp-server self
> !
> svc nsap xx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.00
> proto ip 172.16.1.2 bro
> enc aal5snap
>!
>
>thanks in advance
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:46 GMT-3