From: huang gang (bgv@ggv.com.cn)
Date: Fri May 23 2003 - 05:10:00 GMT-3
hi,
i think you should not config the arp server and the svc map at the same time!
if you use arp server(classical ip over atm),you can ping the remote router only after the remote router registered the ip address and nsap address in the arp server.
huangg
Tel: 010-62984668-3912
----- Original Message -----
From: "Lin Xiaodong" <Linxiaodong@21Vianet.com>
To: <ccielab@groupstudy.com>
Sent: Friday, May 23, 2003 1:47 PM
Subject: ATM SVC
> hi boddies,
> I config the atm svc as following but why i cannot always ping the
> remote end successfully ?
> maybe somewhere is wrong ? who can help me ? my config as follows
>
> int atm 2/0
> ip add 172.16.1.1 255.255.255.0
> atm esi-add xxxx.xxxx.xxxx.00
> pvc 0/16 ilmi
> !
> pvc 0/5 qusaal
> !
> atm ilmi-keepalive
> !
> atm arp-server self
> !
> svc nsap xx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.xxxx.00
> proto ip 172.16.1.2 bro
> enc aal5snap
> !
>
> thanks in advance
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:46 GMT-3