From: keyser soze (soze39@hotmail.com)
Date: Thu May 15 2003 - 07:59:30 GMT-3
Thanks for all your suggestions. It finally worked. It wan't an area
problem. The CAT ports were in different VLANS.
Thanks once again.
>From: "Dave Meyer" <dave.meyer@db.com>
>To: "Jung, Jin" <jin.jung@lmco.com>
>CC: ccielab@groupstudy.com, nobody@groupstudy.com, "'keyser soze'"
><soze39@hotmail.com>
>Subject: RE: OSPF basic configuration problem
>Date: Wed, 14 May 2003 16:14:12 -0400
>
>
>ospf process is local so it shouldnt matter
>
>
>
> "Jung, Jin"
> <jin.jung@lmco.co To: "'keyser soze'"
><soze39@hotmail.com>, ccielab@groupstudy.com
> m> cc:
> Sent by: Subject: RE: OSPF basic
>configuration problem
> nobody@groupstudy
> .com
>
>
> 05/14/03 01:47 PM
> Please respond to
> "Jung, Jin"
>
>
>
>
>
>
>You have two different process running on each router,
>
>Router 1 ospf 1
>Router 2 ospf 2
>
>Try to run on same process, and see if it will work for you.
>
>Jin jung...
>
>-----Original Message-----
>From: keyser soze [mailto:soze39@hotmail.com]
>Sent: Wednesday, May 14, 2003 3:29 AM
>To: ccielab@groupstudy.com
>Subject: OSPF basic configuration problem
>
>
>Hi all.
>
>I've a problem configuring OSPF between two routers via ethernet. The sh ip
>route only shows directly connected networks. I'm pasting the running
>config
>
>below. Any help would be appreciated.
>
>---- R1 -----
>hostname R1
>
>interface Loopback0
>ip address 131.108.4.1 255.255.255.128
>!
>interface Loopback1
>ip address 131.108.4.129 255.255.255.128
>!
>interface Loopback2
>ip address 131.108.5.1 255.255.255.224
>!
>interface Ethernet0
>ip address 131.108.1.1 255.255.255.0
>!
>interface Serial0
>no ip address
>shutdown
>no fair-queue
>!
>interface Serial1
>no ip address
>shutdown
>!
>interface BRI0
>no ip address
>shutdown
>!
>router ospf 1
>log-adjacency-changes
>network 131.108.1.0 0.0.0.255 area 1
>network 131.108.4.0 0.0.0.127 area 1
>network 131.108.4.128 0.0.0.127 area 1
>network 131.108.5.0 0.0.0.31 area 1
>!
>ip classless
>ip http server
>
>---- R1 -----
>hostname R2
>!
>!
>!
>!
>!
>!
>ip subnet-zero
>!
>!
>!
>!
>!
>!
>interface Loopback0
>ip address 131.108.5.3 255.255.255.224
>!
>interface Loopback1
>ip address 131.108.6.1 255.255.255.255
>!
>interface Loopback2
>ip address 131.108.6.2 255.255.255.255
>!
>interface Ethernet0
>ip address 131.108.1.2 255.255.255.0
>!
>interface Serial0
>no ip address
>shutdown
>no fair-queue
>!
>interface Serial1
>no ip address
>shutdown
>!
>
>router ospf 2
>log-adjacency-changes
>network 131.108.1.0 0.0.0.255 area 1
>network 131.108.5.32 0.0.0.31 area 1
>network 131.108.6.1 0.0.0.0 area 1
>network 131.108.6.2 0.0.0.0 area 1
>!
>ip classless
>ip http server
>
>Thanks.
>
>_________________________________________________________________
>Protect your PC - get McAfee.com VirusScan Online
>http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
>
>
>
>
>
>--
>
>This e-mail may contain confidential and/or privileged information. If you
>are not the intended recipient (or have received this e-mail in error)
>please notify the sender immediately and destroy this e-mail. Any
>unauthorized copying, disclosure or distribution of the material in this
>e-mail is strictly forbidden.
>
>
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:43 GMT-3