From: keyser soze (soze39@hotmail.com)
Date: Fri May 16 2003 - 06:45:42 GMT-3
Thanks for all your suggestions. CAT ports were in different VLANS. Thanks
once again.
>From: "Kevin Banifaz" <kbanifaz@hotmail.com>
>Reply-To: "Kevin Banifaz" <kbanifaz@hotmail.com>
>To: EMoffat@fsci.com, soze39@hotmail.com, ccielab@groupstudy.com
>Subject: RE: OSPF basic configuration problem
>Date: Wed, 14 May 2003 16:24:20 -0700
>
>This looks like it's a physicall or data link layer issue.
>Check the ports on your switch
>
>
>>From: "Moffat, Ed" <EMoffat@fsci.com>
>>Reply-To: "Moffat, Ed" <EMoffat@fsci.com>
>>To: "'keyser soze'" <soze39@hotmail.com>, "'ccielab@groupstudy.com'"
>><ccielab@groupstudy.com>
>>Subject: RE: OSPF basic configuration problem
>>Date: Wed, 14 May 2003 12:18:38 -0700
>>
>>Can you ping the connected R1-E0 interface from R2-E0 ?
>>What result do you get if you do a show ip ospf neighbors ?
>>
>>-----Original Message-----
>>From: keyser soze [mailto:soze39@hotmail.com]
>>Sent: Wednesday, May 14, 2003 12:29 AM
>>To: ccielab@groupstudy.com
>>Subject: OSPF basic configuration problem
>>
>>
>>Hi all.
>>
>>I've a problem configuring OSPF between two routers via ethernet. The sh
>>ip
>>route only shows directly connected networks. I'm pasting the running
>>config
>>
>>below. Any help would be appreciated.
>>
>>---- R1 -----
>>hostname R1
>>
>>interface Loopback0
>>ip address 131.108.4.1 255.255.255.128
>>!
>>interface Loopback1
>>ip address 131.108.4.129 255.255.255.128
>>!
>>interface Loopback2
>>ip address 131.108.5.1 255.255.255.224
>>!
>>interface Ethernet0
>>ip address 131.108.1.1 255.255.255.0
>>!
>>interface Serial0
>>no ip address
>>shutdown
>>no fair-queue
>>!
>>interface Serial1
>>no ip address
>>shutdown
>>!
>>interface BRI0
>>no ip address
>>shutdown
>>!
>>router ospf 1
>>log-adjacency-changes
>>network 131.108.1.0 0.0.0.255 area 1
>>network 131.108.4.0 0.0.0.127 area 1
>>network 131.108.4.128 0.0.0.127 area 1
>>network 131.108.5.0 0.0.0.31 area 1
>>!
>>ip classless
>>ip http server
>>
>>---- R1 -----
>>hostname R2
>>!
>>!
>>!
>>!
>>!
>>!
>>ip subnet-zero
>>!
>>!
>>!
>>!
>>!
>>!
>>interface Loopback0
>>ip address 131.108.5.3 255.255.255.224
>>!
>>interface Loopback1
>>ip address 131.108.6.1 255.255.255.255
>>!
>>interface Loopback2
>>ip address 131.108.6.2 255.255.255.255
>>!
>>interface Ethernet0
>>ip address 131.108.1.2 255.255.255.0
>>!
>>interface Serial0
>>no ip address
>>shutdown
>>no fair-queue
>>!
>>interface Serial1
>>no ip address
>>shutdown
>>!
>>
>>router ospf 2
>>log-adjacency-changes
>>network 131.108.1.0 0.0.0.255 area 1
>>network 131.108.5.32 0.0.0.31 area 1
>>network 131.108.6.1 0.0.0.0 area 1
>>network 131.108.6.2 0.0.0.0 area 1
>>!
>>ip classless
>>ip http server
>>
>>Thanks.
>>
>>_________________________________________________________________
>>Protect your PC - get McAfee.com VirusScan Online
>>http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
>
>_________________________________________________________________
>MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.
>http://join.msn.com/?page=features/virus
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:44 GMT-3