From: Volkov, Dmitry (IDS Canada) (dmitry_volkov@ca.ml.com)
Date: Thu May 08 2003 - 13:18:23 GMT-3
Connie,
Where did You find MTU 1504 ?
3550#sh int vlan 1
Vlan1 is up, line protocol is up
  Hardware is EtherSVI, address is 000a.f4d2.d100 (bia 000a.f4d2.d100)
  Internet address is 192.1.1.100/24
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
3550#sh ip int vlan1
Vlan1 is up, line protocol is up
  Internet address is 192.1.1.100/24
  Broadcast address is 255.255.255.255
  Address determined by non-volatile memory
  MTU is 1500 bytes
Dmitry Volkov
CCIE # 10292
> -----Original Message-----
> From: Connie Nie [mailto:CNie@EPLUS.com]
> Sent: Thursday, May 08, 2003 9:28 AM
> To: 'Oliver Ziltener'; ccielab@groupstudy.com
> Subject: RE: 3550 with svi: strange ospf neighborship problem
> 
> 
> SVI has a MTU size of 1504 and router 1500. You need to set 
> them to be the
> same.
> 
> Connie
> -----Original Message-----
> From: Oliver Ziltener [mailto:ziltener@netcloud.ch] 
> Sent: Thursday, May 08, 2003 4:27 AM
> To: ccielab@groupstudy.com
> Subject: 3550 with svi: strange ospf neighborship problem
> 
> Hey all
> totally easy setup...
> 2 Routers (R5, R6) are connectet to vlan1 on 3550, vlan1 is 
> speaking ospf.
> Ports on the 3550 are in "switchport mode access"
> Both router build up ospf adj but not with vlan1.
> 
> 3550#show ip ospf neighbor 
> Neighbor ID     Pri   State           Dead Time   Address     
>     Interface
> 192.168.10.5      1   EXCHANGE/DR     00:00:35    
> 192.168.10.5    Vlan1
> 192.168.10.6      1   EXCHANGE/BDR    00:00:35    
> 192.168.10.6    Vlan1
> 3550#
> 
> R5#show ip ospf neighbor 
> Neighbor ID     Pri   State           Dead Time   Address     
>     Interface
> 3.5.5.0           1   EXSTART/DROTHER 00:00:38    192.168.10.1
> Ethernet0/0
> 192.168.10.6      1   FULL/BDR        00:00:31    192.168.10.6
> Ethernet0/0
> R5#
> 
> R6#show ip ospf neighbor 
> Neighbor ID     Pri   State           Dead Time   Address     
>     Interface
> 3.5.5.0           1   EXSTART/DROTHER 00:00:39    192.168.10.1
> Ethernet0/0
> 192.168.10.5      1   FULL/DR         00:00:37    192.168.10.5
> Ethernet0/0
> R6#
> 
> What is here the problem or we have here a bug?
> 
> thanks
> Oliver
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:39 GMT-3