From: Oliver Ziltener (ziltener@netcloud.ch)
Date: Thu May 08 2003 - 06:26:47 GMT-3
Hey all
totally easy setup...
2 Routers (R5, R6) are connectet to vlan1 on 3550, vlan1 is speaking ospf.
Ports on the 3550 are in "switchport mode access"
Both router build up ospf adj but not with vlan1.
3550#show ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
192.168.10.5 1 EXCHANGE/DR 00:00:35 192.168.10.5 Vlan1
192.168.10.6 1 EXCHANGE/BDR 00:00:35 192.168.10.6 Vlan1
3550#
R5#show ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
3.5.5.0 1 EXSTART/DROTHER 00:00:38 192.168.10.1 Ethernet0/0
192.168.10.6 1 FULL/BDR 00:00:31 192.168.10.6 Ethernet0/0
R5#
R6#show ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
3.5.5.0 1 EXSTART/DROTHER 00:00:39 192.168.10.1 Ethernet0/0
192.168.10.5 1 FULL/DR 00:00:37 192.168.10.5 Ethernet0/0
R6#
What is here the problem or we have here a bug?
thanks
Oliver
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:38 GMT-3