From: Lupi, Guy (Guy.Lupi@eurekanetworks.net)
Date: Mon Apr 28 2003 - 15:49:53 GMT-3
Do a show proc mem with no bgp configured and see what your free memory
level is. If it is too low, the router won't be able to start certain
processes. Take a look at this link:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note091
86a00800a6f3a.shtml#topic1
-----Original Message-----
From: John Tafasi [mailto:johntafasi@yahoo.com]
Sent: Monday, April 28, 2003 1:37 PM
To: ccielab
Subject: Memory allocation of 40 bytes failed
Hi Group,
I have a problem with my 4500 series router. The router has a 32 MB memory,
but as soon as I start configuring bgp it runs out of memory. Below you
will find the error message. Can some one tell me if this can be cured
through configuration?
Thanks
John Tafasi
r6-Whitetooth(config)#router bgp 65535
r6-Whitetooth(config-router)#
00:05:42: %SYS-2-MALLOCFAIL: Memory allocation of 40 bytes failed from
0x604E0388, alignment 0
Pool: Processor Free: 32 Cause: Not enough free memory
Alternate Pool: None Free: 0 Cause: No Alternate pool
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:08 GMT-3