Memory allocation of 40 bytes failed

From: John Tafasi (johntafasi@yahoo.com)
Date: Mon Apr 28 2003 - 14:37:22 GMT-3

Next message: jgraun@attbi.com: "RE: How to determine what udp ports are being used on the"
Previous message: kasturi cisco: "Re: NTP Clarification...(with link)"
Next in thread: Lupi, Guy: "RE: Memory allocation of 40 bytes failed"
Maybe reply: Lupi, Guy: "RE: Memory allocation of 40 bytes failed"
Maybe reply: Brian Dennis: "RE: Memory allocation of 40 bytes failed"
Maybe reply: John Tafasi: "Re: Memory allocation of 40 bytes failed"
Maybe reply: Brian Dennis: "RE: Memory allocation of 40 bytes failed"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Group,

I have a problem with my 4500 series router. The router has a 32 MB memory,
but as soon as I start configuring bgp it runs out of memory. Below you
will find the error message. Can some one tell me if this can be cured
through configuration?

Thanks
John Tafasi

r6-Whitetooth(config)#router bgp 65535
r6-Whitetooth(config-router)#
00:05:42: %SYS-2-MALLOCFAIL: Memory allocation of 40 bytes failed from
0x604E0388, alignment 0
Pool: Processor Free: 32 Cause: Not enough free memory
Alternate Pool: None Free: 0 Cause: No Alternate pool

Next message: jgraun@attbi.com: "RE: How to determine what udp ports are being used on the"
Previous message: kasturi cisco: "Re: NTP Clarification...(with link)"
Next in thread: Lupi, Guy: "RE: Memory allocation of 40 bytes failed"
Maybe reply: Lupi, Guy: "RE: Memory allocation of 40 bytes failed"
Maybe reply: Brian Dennis: "RE: Memory allocation of 40 bytes failed"
Maybe reply: John Tafasi: "Re: Memory allocation of 40 bytes failed"
Maybe reply: Brian Dennis: "RE: Memory allocation of 40 bytes failed"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:08 GMT-3