From: Tony Schaffran (tschaffran@cconlinelabs.com)
Date: Fri Apr 25 2003 - 15:44:46 GMT-3
I think this greatly depends on the router you are doing this on.
I have observed:
2500 = 5 vty's allowed
2600 = 16 vty' allowed
3600 = 871 vty's allowed
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCSS, NNCDS, CNE, MCSE
www.cconlinelabs.com
"Your #1 choice for Cisco rack rentals."
----- Original Message -----
From: "Tim Fletcher" <tim@fletchmail.net>
To: "Leo Song" <lsong@dataphile.ca>; "'Tony Schaffran'"
<tschaffran@cconlinelabs.com>; "'hoon'" <urlee21@kornet.net>;
<ccielab@groupstudy.com>
Sent: Friday, April 25, 2003 10:29 AM
Subject: RE: increasing number of line vty in 2511???
> I don't think you need enterprise to do this, I think any version will do.
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fter
sv_c/dcdpt.htm#1001764
>
> -Tim Fletcher #11406
>
> At 10:55 AM 4/25/2003 -0400, Leo Song wrote:
> >Yes I do.
> >
> >System image file is "tftp://207.194.137.200/c2600-jk2s-mz.121-16.bin"
> >
> >dsltorrt6b>en
> >Password:
> >dsltorrt6b#conf t
> >Enter configuration commands, one per line. End with CNTL/Z.
> >dsltorrt6b(config)#line vty 0 100
> >dsltorrt6b(config-line)#
> >
> >
> >Leo
> >
> >
> >-----Original Message-----
> >From: Tony Schaffran [mailto:tschaffran@cconlinelabs.com]
> >Sent: Friday, April 25, 2003 10:39 AM
> >To: Leo Song; 'hoon'; ccielab@groupstudy.com
> >Subject: Re: increasing number of line vty in 2511???
> >
> >What does the Enterprise version give you?
> >
> >You cannot increase the number of VTY ports. If you need additional
> >connections through a terminal server, a 2511 in this case, you can
> >telnet
> >directly to the TTY port you need access to. This will allow you to
> >have
> >more than 5 connections through a terminal server.
> >
> >
> >
> >Tony Schaffran
> >Network Analyst
> >CCIE #11071
> >CCNP, CCNA, CCDA,
> >NNCSS, NNCDS, CNE, MCSE
> >
> >www.cconlinelabs.com
> >"Your #1 choice for Cisco rack rentals."
> >
> >
> >----- Original Message -----
> >From: "Leo Song" <lsong@dataphile.ca>
> >To: "'hoon'" <urlee21@kornet.net>; <ccielab@groupstudy.com>
> >Sent: Friday, April 25, 2003 6:49 AM
> >Subject: RE: increasing number of line vty in 2511???
> >
> >
> > > Upgrade to IOS Enterprise version.
> > >
> > > Leo
> > >
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> >Of
> > > hoon
> > > Sent: Friday, April 25, 2003 6:00 AM
> > > To: ccielab@groupstudy.com
> > > Subject: increasing number of line vty in 2511???
> > >
> > > hi group,
> > > is there anyone knows how to increase the number of line vty more than
> >5
> > > (line vty 0 4)?
> > > Should I upgrade IOS version to do this?? (the version now is 12.0(18)
> >)
> > >
> > > Thank you in advance.
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:07 GMT-3