From: CNLink Technical (tech_support@us.cnlink.net)
Date: Fri Apr 25 2003 - 15:28:55 GMT-3
No it won't
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Swink, Dave
Sent: Friday, April 25, 2003 9:04 AM
To: 'Nguyen Hoang Long'; Yadav, Arvind K (CAP, GECIS);
ccielab@groupstudy.com
Subject: RE: logging level
Nguyen,
This will limit error message logging to only the specified levels:
logging trap error
logging trap emergencies
logging trap notifications
Dave Swink
-----Original Message-----
From: Nguyen Hoang Long [mailto:ng-hlong@hn.vnn.vn]
Sent: Thursday, April 24, 2003 8:19 PM
To: Yadav, Arvind K (CAP, GECIS); ccielab@groupstudy.com
Subject: Re: logging level
not really what I want, check my exact requirement:
> Is there anyway around to configure logging to a Syslog server, and sent
ONLY
> error(3), emergencies(0) and notifications(5) messages ?
>
>
>
> 'logging trap notifications' command will send all messages from
> notifications(5) up to emergencies(0).
----- Original Message -----
From: "Yadav, Arvind K (CAP, GECIS)" <Arvind.Yadav@gecis.ge.com>
To: "'Nguyen Hoang Long'" <ng-hlong@hn.vnn.vn>; <ccielab@groupstudy.com>
Sent: Thursday, April 24, 2003 8:06 PM
Subject: RE: logging level
> You can define which level you want (0-7)
>
> Router(config)#logging trap ?
> <0-7> Logging severity level
> alerts Immediate action needed (severity=1)
> critical Critical conditions (severity=2)
> debugging Debugging messages (severity=7)
> emergencies System is unusable (severity=0)
> errors Error conditions (severity=3)
> informational Informational messages (severity=6)
> notifications Normal but significant conditions (severity=5)
> warnings Warning conditions (severity=4)
> <cr>
>
> Arvind
>
> -----Original Message-----
> From: Nguyen Hoang Long [mailto:ng-hlong@hn.vnn.vn]
> Sent: Thursday, April 24, 2003 2:46 PM
> To: ccielab@groupstudy.com
> Subject: Fw: logging level
>
>
> Hi group,
> Is there anyway around to configure logging to a Syslog server, and sent
ONLY
> error(3), emergencies(0) and notifications(5) messages ?
>
>
>
> 'logging trap notifications' command will send all messages from
> notifications(5) up to emergencies(0).
>
>
>
> thx
>
> Long.
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:07 GMT-3