From: Daniel Cisco Group Study (danielcgs@imc.net.au)
Date: Wed Apr 23 2003 - 08:03:21 GMT-3
Sounds very much like a bug.... Try newer code.
Daniel
-----Original Message-----
From: ccie2be [mailto:ccie2be@nyc.rr.com]
Sent: Wednesday, 23 April 2003 08:44
To: Group Study
Subject: Eigrp is misbehaving in a ver weird way
Hi ya'll,
Check this out.
Config for Router 4
int lo0
ip addr 198.168.4.4 255.255.255.0
int s0
ip addr 172.16.234.4 255.255.255.0
router eigrp 1
no autosummary
net 198.168.4.0
net 172.16.0.0
Here's the weird thing!!!
On this router, a show ip eigrp interfaces only shows int s0, not lo0. There
are several other routers where lo0's ip addr = 198.168.X.X where X = the
router's number.
On other routers, a similiar config results in lo0 sometimes showing up in the
output of the above show command but not always. Why?
I've tried shutting lo0 and then no shutting the interface. In those routers
where lo0 shows up in the show ip ei int, the lo0 interface is advertised as
it should be but the int isn't being advertised when it's not in the output of
sh ip ei int.
So, why isn't eigrp always picking up the lo0 interface? And, what should I
do about it?
Thanks in advance. Jim
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
This footnote also confirms that this email message has been swept by
MIMEsweeper for the presence of computer viruses.
www.mimesweeper.com
**********************************************************************
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:02 GMT-3