RE: Register setting to reload from telnet session

From: ¼B³Õ¤¯ (johnson_liu@corp.giga.net.tw)
Date: Sun Apr 20 2003 - 22:51:47 GMT-3

• Next message: ¼B³Õ¤¯: "RE: ospf over nbma- neighbor statements necessary on which"
• Previous message: Jay Hennigan: "Re: show command for PBR"
• Maybe in reply to: Jay Chandradas: "Register setting to reload from telnet session"
• Next in thread: Jonathan V Hays: "RE: Register setting to reload from telnet session"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Is there any mistype mistake in this question?
You can reload router from a telnet session as you get the proper priviledge level when you login the router.

If you want to ask password recovery procedure, the register code should be modify as 0x2142.

--
Johnson Liu
Gigamedia, Inc.
Senoir Network Engineer
CCNP/CCDP/CCIE#11440
-----Original Message-----
From: Jay Chandradas [mailto:jachandr@cisco.com] 
Sent: Monday, April 21, 2003 4:36 AM
To: ccielab@groupstudy.com
Subject: Register setting to reload from telnet session
Guys!
Anyone remember the register setting, for enabling me to reload the router 
from a telnet session ?
Thanks
Jay.

• Next message: ¼B³Õ¤¯: "RE: ospf over nbma- neighbor statements necessary on which"
• Previous message: Jay Hennigan: "Re: show command for PBR"
• Maybe in reply to: Jay Chandradas: "Register setting to reload from telnet session"
• Next in thread: Jonathan V Hays: "RE: Register setting to reload from telnet session"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:59 GMT-3