From: Jonathan V Hays (jhays@jtan.com)
Date: Mon Apr 21 2003 - 11:39:05 GMT-3
Did he mean "reload in 5", which will automatically reboot the router in
5 minutes?
This command is useful where you are telnetted to a remote router and
are making changes that might cause you to lose remote connection. Just
make sure you do NOT save your configuration changes prior to entering
the "reload in 5" command.
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of <B3U$/
> Sent: Sunday, April 20, 2003 9:52 PM
> To: Jay Chandradas; ccielab@groupstudy.com
> Subject: RE: Register setting to reload from telnet session
>
>
> Is there any mistype mistake in this question?
> You can reload router from a telnet session as you get the
> proper priviledge level when you login the router.
>
> If you want to ask password recovery procedure, the register
> code should be modify as 0x2142.
>
> --
> Johnson Liu
> Gigamedia, Inc.
> Senoir Network Engineer
> CCNP/CCDP/CCIE#11440
>
> -----Original Message-----
> From: Jay Chandradas [mailto:jachandr@cisco.com]
> Sent: Monday, April 21, 2003 4:36 AM
> To: ccielab@groupstudy.com
> Subject: Register setting to reload from telnet session
>
>
> Guys!
>
> Anyone remember the register setting, for enabling me to
> reload the router
> from a telnet session ?
> Thanks
> Jay.
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:59 GMT-3