From: tan (tan@dia.janis.or.jp)
Date: Fri Apr 18 2003 - 03:54:36 GMT-3
Thanks, it is working now. Don't know what went wrong, but reboot helped.
> -----Original Message-----
> From: folivore [mailto:folivore@hotmail.com]
> Sent: Friday, April 18, 2003 1:30 PM
> To: tan
> Subject: Re: changing ospf AD per route via ACL
>
>
> On RTA do a "show ip ospf database rout 150.100.2.2" and
> show ip route
> 150.100.2.2
> paste the result here.
> Only reason I can think of is RTB in another area and
> 150.100.2.2 is learned
> by RTA from another router-id.
>
> ----- Original Message -----
> From: "tan" <tan@dia.janis.or.jp>
> To: "Ccielab (E-mail)" <ccielab@groupstudy.com>
> Sent: Thursday, April 17, 2003 8:26 PM
> Subject: changing ospf AD per route via ACL
>
>
> > I have been using this command with varying degrees of
> success to have
> > external eigrp route preferred. RTA has eigrp link to down to RTB on
> right,
> > and ospf link down to RTC on left. B and C have ospf link.
> >
> > RTA at top
> > router ospf 66
> > distance 171 150.100.2.2 0.0.0.0 10 <--RID of RTB on
> bottom right sending
> > route natively in ospf.
> > exit
> > acc permit 150.100.2.0 0.0.0.255 <--route to adjust, which
> is loopback,
> and
> > RID as well
> >
> > Sometime it works, but most of the time the route is not
> adjusted. I have
> > tried different masks on the statement, different loopback
> masks (/32 or
> > /24), with and without ip ospf network point-to-point on
> loopback. None of
> > this should seem to matter, but the route will not adjust.
> The first time
> I
> > did this it worked smooth but now I cannot seem to find the right
> > combination. Can somebody provide pointers.
> >
> > Thanks,
> > Marc
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:57 GMT-3