From: love cisco (love_cisco@hotmail.com)
Date: Fri Apr 18 2003 - 03:33:51 GMT-3
I will use "access-list 110 deny ip 10.1.1.0 0.0.0.0 host 255.255.255.0"
if it is filtering BGP up date.
>From: "Scott M. Livingston" <scottl@sprinthosting.net>
>Reply-To: "Scott M. Livingston" <scottl@sprinthosting.net>
>To: "'Richard Davidson'" <rich@myhomemail.net>, "'groupstudy'"
<ccielab@groupstudy.com>
>Subject: RE: access-list used for filtering routes
>Date: Thu, 17 Apr 2003 22:43:28 -0500
>
>access-list 110 deny ip 10.1.1.0 0.0.0.255 host 255.255.255.0
>-Or-
>access-list 110 deny ip 10.1.1.0 0.0.0.255 255.255.255.0 0.0.0.0
>
>If you use example #2 above the IOS will convert it to look like example
>#1
>
>Thanks,
>Scott
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>Richard Davidson
>Sent: Thursday, April 17, 2003 9:40 PM
>To: groupstudy
>Subject: access-list used for filtering routes
>
>Can anyone confirm for me that these will match the
>same addresses. I can get the prefix-list to match
>but the acl will not.
>
>ip prefix-list deny 10.1.1.0/24 le 24
>access-list 101 de ip 10.1.1.0 0.0.0.0 255.255.255.0
>0.0.0.0
>
>I am trying to match only 10.1.1.0/24.
>Rich
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:57 GMT-3