Re: ISIS and OSPF redistrubution problem.

From: Jennifer Bellucci (jennifer_bellucci@hotmail.com)
Date: Mon Apr 14 2003 - 06:36:10 GMT-3

with isis the protocol is designed not to advertise directly connected
network. You can thank Radia for that. Anyway, you have to do it under the
OSPF process. I had the same problem and red in ever possible way apart from
the ospf way and got nothing, but under OSPF it comes up in seconds.
----- Original Message -----
From: "Hung, Sing-Yu" <Sing-Yu.Hung@pccw.com>
To: "ccie_studying" <ccie_studying@hotmail.com>; "Lin Xiaodong"
<Linxiaodong@21Vianet.com>; "Tomikawa" <h-tomikawa@syscomusa.com>;
<ccielab@groupstudy.com>
Sent: Monday, April 14, 2003 7:57 AM
Subject: RE: ISIS and OSPF redistrubution problem.

> Hi,
>
> I want to know weather "redistribute connected" is configured under
> OSPF or ISIS?
>
> Bradford Hung
>
>
>
> -----Original Message-----
> From: ccie_studying [mailto:ccie_studying@hotmail.com]
> Sent: Monday, April 14, 2003 11:00 AM
> To: Lin Xiaodong; Tomikawa; ccielab@groupstudy.com
> Subject: Re: ISIS and OSPF redistrubution problem.
>
>
> I think you need to do it. Because ISIS behaves different with other
routing
> protocols. If you don't redistribute connected, that route will not get to
> known by other routers.
>
>
> ----- Original Message -----
> From: "Lin Xiaodong" <Linxiaodong@21Vianet.com>
> To: "Tomikawa" <h-tomikawa@syscomusa.com>; <ccielab@groupstudy.com>
> Sent: Sunday, April 13, 2003 9:31 PM
> Subject: g-e$
> : ISIS and OSPF redistrubution problem.
>
>
> > no, you don't need to do it :)
> >
> >
> >
> > -----ee' i.d;6-----
> > ed;6d::: Tomikawa [mailto:h-tomikawa@syscomusa.com]
> > eif6i4: 2003e944f14f% 4:26
> > f6d;6d::: ccielab@groupstudy.com
> > d8;i": ISIS and OSPF redistrubution problem.
> >
> >
> > Hi.
> > I have a problem of ISIS and OSPF redistribution issue.
> > ISIS and OSPF boundary router is "R1".
> > ISIS is only enabled on R1's serial0 interface and OSPF is enabled on
> > ether0.
> > From other OSPF routers, all ISIS routes are redistributed on R1, except
> > serial0 of R1 network address.
> > In ISIS redistribution behavoir, Do I need to configure also
> > "redistrubute connected",
> > because in case of RIP or EIGRP, R1's serial0 network is redistributed
> > to OSPF without
> > "redistributed connected" statement.
> >
> > Thanks.

This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:52 GMT-3