Extended access list used in route-map matching

From: Joe Chang (changjoe@earthlink.net)
Date: Mon Apr 07 2003 - 14:43:34 GMT-3

Next message: Peng Zheng: "RE: Lowest BGP router ID prefered ?"
Previous message: wsqccie@hotnail.com: "Re: QOS question on Bc with CAR"
Next in thread: jgraun@attbi.com: "Re: Extended access list used in route-map matching"
Maybe reply: jgraun@attbi.com: "Re: Extended access list used in route-map matching"
Maybe reply: Tim Fletcher: "Re: Extended access list used in route-map matching"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

Would this be the correct way to match the route 137.48.4.0/21 with an
extended access-list?

route-map map1 permit 10
match ip address 100

access-list 100 permit ip host 137.48.4.0 host 255.255.248.0

TIA
Joe

Next message: Peng Zheng: "RE: Lowest BGP router ID prefered ?"
Previous message: wsqccie@hotnail.com: "Re: QOS question on Bc with CAR"
Next in thread: jgraun@attbi.com: "Re: Extended access list used in route-map matching"
Maybe reply: jgraun@attbi.com: "Re: Extended access list used in route-map matching"
Maybe reply: Tim Fletcher: "Re: Extended access list used in route-map matching"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:48 GMT-3