Re: Extended access list used in route-map matching

From: jgraun@attbi.com
Date: Mon Apr 07 2003 - 17:14:44 GMT-3

Next message: Tim Fletcher: "Re: IP EXTENDED ACCESS-LIST USAGE IN BGP"
Previous message: Leo Seto: "RE: IPsec for CCIE R/S"
Maybe in reply to: Joe Chang: "Extended access list used in route-map matching"
Next in thread: Tim Fletcher: "Re: Extended access list used in route-map matching"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

that might never tried using the host command but this should work instead

access-list 100 permit ip host 137.48.4.0 255.255.248.0 0.0.0.0
> Hi,
>
> Would this be the correct way to match the route 137.48.4.0/21 with an
> extended access-list?
>
> route-map map1 permit 10
> match ip address 100
>
> access-list 100 permit ip host 137.48.4.0 host 255.255.248.0
>
> TIA
> Joe

Next message: Tim Fletcher: "Re: IP EXTENDED ACCESS-LIST USAGE IN BGP"
Previous message: Leo Seto: "RE: IPsec for CCIE R/S"
Maybe in reply to: Joe Chang: "Extended access list used in route-map matching"
Next in thread: Tim Fletcher: "Re: Extended access list used in route-map matching"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:48 GMT-3