From: Brian Dennis (brian@5g.net)
Date: Mon Apr 07 2003 - 00:31:02 GMT-3
The "service hide-telnet-addresses" command is not needed. The
"busy-message" command takes a hostname as an argument because the
busy-message is configured for a particular host. You can either have
the "ip host" command configured or use DNS.
Rack1R5(config)#busy-message ?
WORD Hostname
Rack1R5(config)#busy-message
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
Director of CCIE Training and Development - IPexpert, Inc.
Mailto: brian@ipexpert.net
Toll Free: 866.225.8064
Outside U.S. & Canada: 312.321.6924
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
pita40
Sent: Sunday, April 06, 2003 6:29 PM
To: Tony Schaffran; 'Jeff Szeto'; ccielab@groupstudy.com
Subject: Re: Can't make busy-message work
Hello,
Are these two command necessary when you
configure busy-message?
service hide-telnet-addresses
ip host r2511 192.168.0.2
thanks
P
----- Original Message -----
From: "Tony Schaffran" <tschaffran@cconlinelabs.com>
To: "'Jeff Szeto'" <jytszeto@hotmail.com>; <ccielab@groupstudy.com>
Sent: Sunday, April 06, 2003 8:58 AM
Subject: RE: Can't make busy-message work
> How many VTY ports are configured? How many telnet sessions did you
> open? You will not see the busy message until all of the VTY's are in
> use.
>
>
> Tony Schaffran
> Network Analyst
> CCIE #11071
> CCNP, CCNA, CCDA,
> NNCDS, NNCSS, CNE, MCSE
>
> www.cconlinelabs.com
> Your #1 choice for online Cisco rack rentals.
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Jeff Szeto
> Sent: Sunday, April 06, 2003 4:48 AM
> To: ccielab@groupstudy.com
> Subject: Can't make busy-message work
>
> Hi Group,
>
> I have tried examples in the archives but can't make it work.
>
> Here is the config:
>
> service hide-telnet-addresses
> ip host r2511 192.168.0.2
>
> busy-message r2511 ^C Busy-message for 2511 ^C
>
> The output:
>
> 2511b#telnet r2511
>
> User Access Verification
>
> Password:
> Password:
> Password:
> % Bad passwords
>
> 2511b#
>
> What is wrong with the config?
>
> Thank you in advance.
>
> Regards,
>
> Jeff
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:48 GMT-3