From: ccie_studying (ccie_studying@hotmail.com)
Date: Mon Apr 07 2003 - 13:30:40 GMT-3
Brian:
What's the difference between busy-message and refuse-message and when do
you use one or other? Thanks!
----- Original Message -----
From: "Brian Dennis" <brian@5g.net>
To: "'pita40'" <pita40@hotmail.com>; <ccielab@groupstudy.com>
Sent: Sunday, April 06, 2003 11:31 PM
Subject: RE: Can't make busy-message work
> The "service hide-telnet-addresses" command is not needed. The
> "busy-message" command takes a hostname as an argument because the
> busy-message is configured for a particular host. You can either have
> the "ip host" command configured or use DNS.
>
> Rack1R5(config)#busy-message ?
> WORD Hostname
>
> Rack1R5(config)#busy-message
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> Director of CCIE Training and Development - IPexpert, Inc.
> Mailto: brian@ipexpert.net
> Toll Free: 866.225.8064
> Outside U.S. & Canada: 312.321.6924
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> pita40
> Sent: Sunday, April 06, 2003 6:29 PM
> To: Tony Schaffran; 'Jeff Szeto'; ccielab@groupstudy.com
> Subject: Re: Can't make busy-message work
>
> Hello,
>
> Are these two command necessary when you
> configure busy-message?
>
> service hide-telnet-addresses
> ip host r2511 192.168.0.2
>
>
> thanks
> P
>
>
> ----- Original Message -----
> From: "Tony Schaffran" <tschaffran@cconlinelabs.com>
> To: "'Jeff Szeto'" <jytszeto@hotmail.com>; <ccielab@groupstudy.com>
> Sent: Sunday, April 06, 2003 8:58 AM
> Subject: RE: Can't make busy-message work
>
>
> > How many VTY ports are configured? How many telnet sessions did you
> > open? You will not see the busy message until all of the VTY's are in
> > use.
> >
> >
> > Tony Schaffran
> > Network Analyst
> > CCIE #11071
> > CCNP, CCNA, CCDA,
> > NNCDS, NNCSS, CNE, MCSE
> >
> > www.cconlinelabs.com
> > Your #1 choice for online Cisco rack rentals.
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Jeff Szeto
> > Sent: Sunday, April 06, 2003 4:48 AM
> > To: ccielab@groupstudy.com
> > Subject: Can't make busy-message work
> >
> > Hi Group,
> >
> > I have tried examples in the archives but can't make it work.
> >
> > Here is the config:
> >
> > service hide-telnet-addresses
> > ip host r2511 192.168.0.2
> >
> > busy-message r2511 ^C Busy-message for 2511 ^C
> >
> > The output:
> >
> > 2511b#telnet r2511
> >
> > User Access Verification
> >
> > Password:
> > Password:
> > Password:
> > % Bad passwords
> >
> > 2511b#
> >
> > What is wrong with the config?
> >
> > Thank you in advance.
> >
> > Regards,
> >
> > Jeff
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:48 GMT-3