Re: LS100 and DS3 ATM on 4500M

From: Gareth Bromley (gbromley@intstar.com)
Date: Sat Apr 05 2003 - 11:02:37 GMT-3

• Next message: cannonr: "Re: Lab re-score ? has Cisco ever made any serious mistake ?"
• Previous message: John Tafasi: "PVC Discovery and Lightstream 100"
• Maybe in reply to: Gareth Bromley: "LS100 and DS3 ATM on 4500M"
• Next in thread: istong@stong.org: "Re: LS100 and DS3 ATM on 4500M"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

> On the 4500, did you configure "atm clock internal" as well as "loopback
> diagnostic". This should create a soft loopback that will bring up the
> interface. If not, you have a bad card.
Did the above (many thanks for pointing that out) and all is ok on the 4500M
side of things.

So it cant be cable, and it dont look like cards either end, so it must be
config issue(s) at one or both of the ends?

Any ideas?

Cheers

Gareth

• Next message: cannonr: "Re: Lab re-score ? has Cisco ever made any serious mistake ?"
• Previous message: John Tafasi: "PVC Discovery and Lightstream 100"
• Maybe in reply to: Gareth Bromley: "LS100 and DS3 ATM on 4500M"
• Next in thread: istong@stong.org: "Re: LS100 and DS3 ATM on 4500M"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:47 GMT-3