From: ccie1@hotmail.com
Date: Tue Apr 01 2003 - 03:08:51 GMT-3
connie:
do you have BGP configured when typing the command? Are your neighbor
relationships up? if not try that first then look at the command.
----- Original Message -----
From: "Connie Nie" <CNie@EPLUS.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, April 01, 2003 1:03 PM
Subject: can not show specific route in BGP
> Hi, there!
>
> I hope some of you might have seen this before---this is driving me
> absolutely insane. I can't seem to do a "show ip bgp a.b.c.d" on some of
my
> routers. They are running 12.1(18), and 12.1(14). On most other routers
> which are running exact same version of IOS, it works fine. On a side
note,
> this is NOT an observation of the April fools. -:-) It really behaves like
> this.
> Any idea?
>
> Thanks.
> Connie
> --------------
> security_R5#sh ip bgp ?
> community Display routes matching the communities
> community-list Display routes matching the community-list
> dampened-paths Display paths suppressed due to dampening
> filter-list Display routes conforming to the filter-list
> flap-statistics Display flap statistics of routes
> inconsistent-as Display only routes with inconsistent origin ASs
> ipv4 Address family
> neighbors Detailed information on TCP and BGP neighbor
connections
> paths Path information
> peer-group Display information on peer-groups
> quote-regexp Display routes matching the AS path "regular
expression"
> regexp Display routes matching the AS path regular expression
> summary Summary of BGP neighbor status
> vpnv4 Display VPNv4 NLRI specific information
> | Output modifiers
> <cr>
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:45 GMT-3