RE: How to configure a ethernet channel as trunk on3550?

From: Gary Lileikis (glileikis@rogers.com)
Date: Tue Mar 25 2003 - 17:12:55 GMT-3

• Next message: iron_tri: "Re: The number of CCIEs grows faster today"
• Previous message: ccie_studying: "Re: 1 aggregated ACL"
• Maybe in reply to: Fan Shan: "How to configure a ethernet channel as trunk on3550?"
• Next in thread: Mike Williams: "RE: How to configure a ethernet channel as trunk on3550?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Fan,
This should work:

interface Port-channel1
 switchport trunk encapsulation dot1q
 switchport mode trunk
 no ip address

interface FastEthernet0/22
 switchport trunk encapsulation dot1q
 switchport mode trunk
 no ip address
 channel-group 1 mode desirable
!
interface FastEthernet0/23
 switchport trunk encapsulation dot1q
 switchport mode trunk
 no ip address
 channel-group 1 mode desirable

Regards,
Gary Lileikis

-----Original Message-----
From: Fan Shan [mailto:shanf@public.jn.sd.cn]
Sent: Tuesday, March 25, 2003 11:36 AM
To: Ccielab@Groupstudy.Com
Subject: How to configure a ethernet channel as trunk on3550?

How to configure a two-port etherchannel ,and make it a trunk? pls in
detail, thx

• Next message: iron_tri: "Re: The number of CCIEs grows faster today"
• Previous message: ccie_studying: "Re: 1 aggregated ACL"
• Maybe in reply to: Fan Shan: "How to configure a ethernet channel as trunk on3550?"
• Next in thread: Mike Williams: "RE: How to configure a ethernet channel as trunk on3550?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:44 GMT-3