From: David Porta (David.Porta003@msd.govt.nz)
Date: Thu Mar 20 2003 - 19:41:54 GMT-3
Hi Nick,
Yes you can.
When you do this, the port becomes a Routed Port. Use the "no
switchport" command and then assign the IP address.
However, when you do this you automatically delete any layer 2
characteristics you may have configured on that port, so keep that in
mind.
Cheers,
David
"Jaksec, Nick" wrote:
>
> On a EMI 3550 can you add an IP address directly on a interface like you can
> with a 2948 switch ??
----------------------------------- David Porta MSD Network Support +064..04.916.3222
------------------------------- This email message and any attachment(s) is intended only for the person(s) or entity(entities) to whom it is addressed. The information it contains may be classified as IN CONFIDENCE and may be legally privileged. If you are not the intended recipient any use, disclosure or copying of the message or attachment(s) is strictly prohibited. If you have received this message in error please notify us immediately and destroy it and any attachment(s). Thank you. The Ministry of Social Development accepts no responsibility for changes made to this message or to any attachment(s) after transmission from the Ministry. -------------------------------
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:42 GMT-3