From: jim.phillipo@guardent.com
Date: Thu Mar 20 2003 - 20:24:42 GMT-3
Here is a show ver from the 2611 I am trying to configure Policing on. For
whatever reason I do not get the option.
r4(config-pmap-c)#?
QoS policy-map class configuration commands:
bandwidth Bandwidth
default Set a command to its defaults
exit Exit from QoS class action configuration mode
no Negate a command or set its defaults
priority Strict Scheduling Priority for this Class
queue-limit Queue Max Threshold for Tail Drop
random-detect Enable Random Early Detection as drop policy
<cr>
r4(config-pmap-c)#^Z
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JK2S-M), Version 12.1(9), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Wed 13-Jun-01 19:41 by kellythw
Image text-base: 0x80008088, data-base: 0x810E20AC
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
r4 uptime is 4 days, 2 hours, 18 minutes
System returned to ROM by reload at 16:04:26 UTC Sun Mar 16 2003
System restarted at 16:06:40 UTC Sun Mar 16 2003
System image file is "flash:c2600-jk2s-mz.121-9.bin"
cisco 2611 (MPC860) processor (revision 0x202) with 59392K/6144K bytes of
memory.
Processor board ID JAD041803M2 (1450571412)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
2 Voice FXS interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Jim Phillipo, CCNP, CCDP
Sr. Internetworking Engineer
W: 401.456.1821 F: 401.456.0599 M: 508.982.8923
90 Royal Little Drive, Providence, RI 02904
www.guardent.com
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:42 GMT-3