From: Scott Morris (swm@emanon.com)
Date: Thu Mar 20 2003 - 01:42:56 GMT-3
The "priority" command allocates traffic to the low-latency (priority)
queue, which gets emptied first. The "bandwidth" command creates a
CBWFQ which will get emptied with the rest of the class-based queues.
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
jim.phillipo@guardent.com
Sent: Wednesday, March 19, 2003 7:27 PM
To: ccielab@groupstudy.com
Subject: QOS Questions
What is the difference between:
Priority 100 versus Bandwidth 100 under the r1(config-pmap-c)# Mode ?
Jim Phillipo, CCNP, CCDP
Sr. Internetworking Engineer
W: 401.456.1821 F: 401.456.0599 M: 508.982.8923
90 Royal Little Drive, Providence, RI 02904
www.guardent.com
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:42 GMT-3