From: Donny MATEO (donny.mateo@sg.ca-indosuez.com)
Date: Tue Mar 11 2003 - 02:51:26 GMT-3
Here is how:
map-class frame EEK
frame end-to-end keepalive mode (anything you want)
!bla bla bla cir, mincir, no adaptive etc etc
exit
int s0
en frame
frame class EEK
exit
int s1.1 point-to-point
frame-relay interface-dlci x
class EEK
Need to do it at both end. You can adjust the timing of the keepalive packets as well according to you need.
Regards,
Donny
Jun Qian
<johnjunqian@yaho To: Tran Tien Phong <PhongTT2@FPT.COM.VN>, ccielab@groupstudy.com
o.com> cc:
Sent by: Subject: Re: Qs about Frame Relay end-to-end keepalive
nobody@groupstudy
.com
11-03-2003 09:35
Please respond to
Jun Qian
I suggest that you use "dial-watch" for this case.
Jun
--- Tran Tien Phong <PhongTT2@FPT.COM.VN> wrote:
> Hi group,
>
> Question for you...
>
> R1 ---------- Frame Switch ------------R2
> | |
> -------------------ISDN----------------------
>
> I am configuring dialer backup on R1. When serial
> interface of R1 is
> down, the ISDN is up. But how to control the serial
> status of the other
> end of FR connection?
> For ex, when serial interface of R2 down, R1 could
> not connect to R2 but
> the serial of R1 is still up and the call is not
> triggered.
>
> Could someone tell me how to configure such that
> when serial of R2 down,
> R1 can trigger the call using backup interface?
> (it's something called
> "end-to-end keepalive" but I have not found docs
> about it)
> TIA
> Phong
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:36 GMT-3